Stainless Steel Brick Reinforcement Mesh
Price:
USD0.70-5.50/PC
MOQ:
100pcs
Delivery Time:
5-7days
Brand:
X MESH
Product Description
ASTM 580 Standard 9 Gauge Wire Diameter 4" Width Masonry Reinforcement Mesh
Masonry Reinforcement Mesh Introduction:
Masonry ladder&truss type reinforcement mesh Raw material:low carbon steel wire,stainless steel wire
The mesh can be electro galvanized or hot dip galvanized after welding,it mainly have two type,ladder type and truss type.
The wire diameter is from2.5mm to 6mm.
Brick Wall Reinforced Mesh, Used in Building Surface, Wall, Ground and Bridge.
Customized specifications and sizes are accepted.
Masonry Reinforcement Mesh is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry.
It is manufactured in 10′ 8″ lengths from wire conforming to ASTM A 82 / A82M for cold drawn steel wire.
It consists of two or more parallel and deformed longitudinal wires welded to a perpendicular cross wire spaced 16″ O.C. Out-to-out spacing is approximately two inches less than the nominal thickness of the wall.
MATERIAL : Iron wire & stainless steel wire 304/316
Qijie metal joint reinforcement products conform to:
ASTM A951 (Standard Specification for Steel Wire for Masonry
Joint Reinforcement)
Our products pass the testing of ASTM A951,We tested in USA .
Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i. minimum
Zinc Coating:
Mill Galvanized coating: (0.1 oz/ft²)
Hot-Dip Galvanized after fabrication: (1.5 oz/ft²)
Wire Diameter:
9 gauge or 3/16ӯ
Side Rods and Cross Rods available in any combination of the above.
Cross Rods welded 16” O.C.
Block Size: Standard Sizes: 4” wall - 16“ wall.
Other widths available on special request.
Masonry Reinforcement Mesh Standard Specification:
* 4” wall - 16” wall
* Other widths available on special request
* (S) Standard: 9 ga. side rods x 9 ga. cross rods
* (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods
* (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods
*Tensile Strength - 80,000 psi
*Yield Point - 70,000 psi
ITEMS # |
Block width |
Mesh width |
Weight(KGS) |
PACKING |
QJM2 |
4'' |
2'' |
0.57 |
50PCS/BDL,20BDL/PALLET |
QJM4 |
6'' |
4'' |
0.61 |
50PCS/BDL,20BDL/PALLET |
QJM6 |
8'' |
6'' |
0.64 |
50PCS/BDL,20BDL/PALLET |
QJM8 |
10'' |
8'' |
0.68 |
50PCS/BDL,20BDL/PALLET |
QJM10 |
12'' |
10'' |
0.71 |
50PCS/BDL,20BDL/PALLET |
Standard Length |
Width |
Finishes |
10’(3.05m) |
2”(50mm) |
UncoatedElectro GalvanizedHot Dipped Galvanized After FabricationStainless Steel |
|
|
4”(100mm) |
|
|
|
6”(150mm) |
|
|
|
8”(200mm) |
|
|
|
10”(250mm) |
|
All products conform to:
|
||
Truss Type Block Reinforcement Mesh Specification
Reference |
Width (mm) |
Thickness (mm) |
Length (mm) |
Material |
TM 50 S |
50 |
3/4/5 |
3000 |
Galvanised steel |
TM 100 GS |
100 |
3/4/5 |
3000 |
Galvanised Steel |
TM 150 GS |
150 |
3/4/5 |
3000 |
Galavanised Steel |
TM 200 GS |
200 |
3/4/5 |
3000 |
Galavanised steel |
TM 50 SS |
50 |
3/4/5 |
3000 |
Stainless steel |
TM 100 SS |
100 |
3/4/5 |
3000 |
Stainless steel |
TM 150 SS |
150 |
3/4/5 |
3000 |
Stainless steel |
TM 200 SS |
200 |
3/4/5 |
3000 |
Stainless Steel |
Ladder Type Block Reinforcement Mesh Specification
Reference |
Width (mm) |
Thickness (mm) |
Length (mm) |
Material |
LM 50 GS |
50 |
3/4/5 |
3000 |
Galvanised steel |
LM100 GS |
100 |
3/4/5 |
3000 |
Galvanised steel |
LM 150 GS |
150 |
3/4/5 |
3000 |
Galvanised steel |
LM 200 GS |
200 |
3/4/5 |
3000 |
Galvanised Steel |
LM 50 SS |
50 |
3/4/5 |
3000 |
Stainless steel |
LM 100 SS |
100 |
3/4/5 |
3000 |
Stainless Steel |
LM 150 SS |
150 |
3/4/5 |
3000 |
Stainless steel |
LM 200 SS |
200 |
3/4/5 |
3000 |
Stainless Steel |
Masonry Reinforcement Mesh Feature :
* Greatly reduces cracking that can arise from thermal stresses. This enhances resistance to water penetration, as cracks are controlled.
* Increases lateral flexural strength.
* Bonds exterior and interior masonry wythes together in composite or cavity walls. Also bonds masonry at intersecting walls and corners
* Increases elasticity and performance of masonry walls under various stresses
(1)Light in weight ,high intensity, huge loading capacity as well as good anti-earthquake capacity.
(2)Simple in construction operation, easy to install.
(3)Can act as a part of the structure of weight bearing, to reduce the cost of material.
(4)Put the panel above the welded wire net fill cement between them.
(5)This type of floor decking sheet has the strong friction between the concrete and floor slab, being fire resistant.
(6)This deck is connected with steel bar ,making it have the higher strength.
Masonry Reinforcement Mesh Application:
Concrete slabbing, roads, paving, foundations, marine work, bank strong rooms, partition slabs, concrete block work, asphalt guttering and so on
1. steel truss applied to precast slabs, pre-high-speed railway sleeper.
2. Used in many high-rise, ultra- high-rise steel buildings
3. Used for steel building, mezzanine floor of “LOFT”
4. The force applied to the complex, special-shaped structure, building
5. Used in-situ concrete structure(RC) buildings
6. Used in the construction of slope roof structure
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Anping Yuanfengrun Mesh Products Co., Ltd.
Location
5 Building, 9 Area, East Development Zone, Anping, Hebei P.R. China.
Contact Person
Victor Meng