S355J2+N Material Diameter 2960mm Rope Drum For Marine Winch

Price Negotiable

Price: Negotiation

MOQ: 1 set

Delivery Time: 30 to 40 working days, depends on order amounts and specification

Brand: LBS

Product Description

S355J2+N Material Diameter 2960mm Rope Drum For Marine Large Equipment

Product feature:

Product name: S355J2+N Material Diameter 2960mm Rope Drum For Marine Large Equipment

Other name: Winch drum

Standard: NS-ISO 13768mK

Sling type: cable or wire

power: Electirc

colour: Blue white

Rope: 100-1000mm

Rope diameter: 3-199mm

Tolerance General: NS-ISO 13768mK

Our company mainly serves lifting machinery, marine machinery, petroleum machinery, water conservancy machinery, We can produce winches and all steel parts for winches.

Structural composition

Q/TY	ITEM	DESCRIPTION	TECHNICAL DESCRIPTION	MATERIAL	MASS
1	1	Plate	PL30	S355J2+N	12.11KG
1	2	Plate	PL25	S355J2+N	1281.01KG
1	3	Plate	PL25	S355J2+N	1278.71KG
1	4	Plate	PL20	S355J2+N	519.77KG
1	5	Plate	PL20	S355J2+N	483.92KG
1	6	Plate	PL20	S355J2+N	322.17KG
2	7	Plate	PL20	S355J2+N	216.29KG
1	8	Plate	PL15	S355J2+N	10.46KG
1	9	Plate	PL15	S355J2+N	23.96KG
1	10	Plate	PL15	S355J2+N	16.1KG
6	11	Plate	PL15	S355J2+N	7.53KG
1	12	Plate	PL15	S355J2+N	237.56KG
11	13	Plate	PL15	S355J2+N	14.68KG
1	14	Plate	PL10	S355J2+N	51.41KG
1	15	Tube,Circular	6605204460	S355J2H+N	4548.39KG
2	16	Bar,Circular		S355J2+N	0.79KG

Advantage and main feature

1. Top quality with competitive price.

2. Widely used in factory, mining, shipyard or double beam cranes.

3. Compact structure and reasonable design.

4. Easy to install, operate and maintenance.

5. Low noise and good working condition.

6. Safe and reliable function.

Preparation and cutting of steel

Cutting and beveling of materials shall be carried out by thermal cutting or machining.
Thermally cut edges shall be ground to sound metal before welding.
All sharp edges, corners and Curing Zone must be rounded to R=2.5mm.
Stainless steel shall by ground, and then acid treated and cleaned before use.

Welding requirement

Welding spatter, beads and slag should be completely removed. Surface damage is filled and grinded flush.

Techinical parameters:

Test temperature and charpy V-notch impact energy shall be in accoradance with DNV lifting appliances No.2.22. values for plates in primary and essential welded steel structure is listed in table below:

Yield stress Re(MPa)	Thichness(mm)	temp(°C)	Impact energy(J)
355	6< t ≤ 25	0	34
	25< t ≤ 50	-20	34
	50< t ≤ 70-40	-40	41
	70< t ≤ 150	-40	50
690	6< t ≤ 25	0	46
	6< t ≤ 25	-20	46
	50< t ≤ 70	-40	46