Pre-Galvanized Carbon Steel Self Adhesive Insulation Hanger pins For Glass Wool

Quick details Of  Self Adhesive Insulation Hanger pins :

Self Adhesive Insulation Hanger pins Product information :

Self Adhesive Insulation hanger pin is an insulation hanger with a self-stick base. When you use it,

please Just peel the release paper from the hanger base and firmly press the base to the clean

duct-free surface. Impale the insulation over the hanger nail and slip on the locking washer.

Self-stick hangers adhere to clean metal surfaces and withstand high temperatures. When

using an adhesive fastener, the fastener is bonded to the duct-work with an appropriate

adhesive and allowed to set up. After sufficient drying time the liner is impaled on the pin

and a washer added to retain the liner.

Self Adhesive Insulation Hanger pins Specification :

Self Adhesive Insulation Hanger pins Pic :

Advantage of Self Adhesive Insulation Hanger pins :

• It has anti-temperature sudden change, cold resistance and heat resistance;
• High bearing capacity, high pressure bearing and good tensile performance;
• easy to install, no special installation tools are required;
•  It is not easy to deform, moisture, vibration, and good thermal properties after loading.

XY PARTS Company introuduce:

  
Hebei Xiangyi metal products company is a insulation fasteners/insulation anchors manufacturing company, we produce all

kinds of insulation pins and washers.can make mold according your drawing pic ,Our products is as following :

CD weld pins              Lacing Anchors     

bimetallic pin              Cup head weld pins          

Quilting pins               perforated base pins       

self adhesive pins      aluminum solar panel mesh clip

all kinds of self locking washers, Dome caps.

Rock Wool Adhesive Insulation Pin Buying guide :

1. choose annealing wire for the pin
   soft wire is easy to bend when fixing rock wool material with self locking washer
2.common size is 2.7mm ,3.0mm wire to make the pin
   2.7mm and 3.0mm wre diamerer is standard size for insulation pin ,at the same time ,the diameter is
   based on the pin length
3. the base is square hardness metal sheet
    hardness metal sheet is more firmly,no-shedding ,non-deformable