Cold Rolled T4 Tinplate Electrolytic Spcc Bright For Food Can
High Quality T3 T4 electrolytic Tinplate Spcc Bright for Food can, Edible Oil Can
Product Introduction
Tinplate is a thin steel or iron sheet with a coating of tin applied either by dipping in molten metal or by electroplating.
Almost all tinplate is now produced by electroplating. Electrolytic tinplate(ETP Tin plate) is classified according to:
- Extent of tempering
- Tin coating mass
- Type of steel
- Annealing methods
- Surface finish
A variety of corrosion processes happen to tinplate. The types of corrosion it faces are:
- Filiform Corrosion - Occurs under the thin coatings of tin. It dispenses throughout the tinplate in the form of small threadlike filaments. These usually lump and crack the coating.
- Pitting Corrosion - Occurs in a specific area of the surface. It usually occurs because of dirt particles sticking on the tinplate. This can also be caused by water-line attacks, crevice corrosion and concentration-cell corrosion.
- Erosion Corrosion - Occurs slowly and over time. It occurs after a tinplate has been open to something, like water or air, for too long. Erosion begins with a small air bubble and lasts on the path of corrosion.
Specifications
|
Product Name |
High Quality T3 T4 electrolytic Tinplate Spcc Bright for Food can, Edible Oil Can |
|
Standard |
GB, JIS, DIN ,ASTM |
|
Material |
SPCC |
|
Grade |
Prime |
|
Annealing |
BA/ CA |
|
Thickness |
0.16-0.7 mm |
|
Width |
600-1000mm |
|
Temper |
T1, T2, T3, T4, T5, DR7, DR8, DR9 |
|
Coating(g/m2) |
1.1/1, 2.0/2.0, 2.8/2.8 |
|
Surface Finish |
Stone, Bright, Silver |
|
Packaging |
Standard export packing. |
|
Payment |
T/T or L/C |
JIANGSU SENYILU METAL MATERIAL CO., LTD supplies various specifications of Double reduced (DR) tinplate and Single reduced (SR) tinplate. At present, the tinplate has been exported to many countries around the world, such as Italy, , Tunisia, Thailand, Brazil and other countries. It is widely used in food packaging and chemical product packaging. We provide high-quality tinplate that meets international standards.
Coating Structure
Production Process
Mechanical Properties
|
emper Grade |
Hardness(HR30Tm) |
Yield Strength(MPa) |
|
T-1 |
49±3 |
330 |
|
T-2 |
53±3 |
350 |
|
T-3 |
57±3 |
370 |
|
T-4 |
61±3 |
415 |
|
T-5 |
65±3 |
450 |
|
T-6 |
70±3 |
530 |
|
DR-7M |
71±5 |
520 |
|
DR-8 |
73±5 |
550 |
|
DR-8M |
73±5 |
580 |
|
DR-9 |
76±5 |
620 |
|
DR-9M |
77±5 |
660 |
|
DR-10 |
80±5 |
690 |
Coating Weight
|
Former Coating Designation |
Nominal Coating Weight |
Minimum average Coating Weight (g/m2) |
|
10# |
1.1/1.1 |
0.9/0.9 |
|
20# |
2.2/2.2 |
1.8/1.8 |
|
25# |
2.8/2.8 |
2.5/2.5 |
|
50# |
5.6/5.6 |
5.2/5.2 |
|
75# |
8.4/8.4 |
7.8/7.8 |
|
100# |
11.2/11.2 |
10.1/10.1 |
|
25#/10# |
2.8/1.1 |
2.5/0.9 |
|
50#/10# |
5.6/1.1 |
5.2/0.9 |
|
75#/25# |
5.6/2.8 |
5.2/2.5 |
|
75#/50# |
8.4/2.8 |
7.8/2.5 |
|
75#/50# |
8.4/5.6 |
7.8/5.2 |
|
100#/25# |
11.2/2.8 |
10.1/2.5 |
|
100#/50# |
11.2/5.6 |
10.1/5.2 |
|
100#/75# |
11.2/8.4 |
10.1/7.8 |
|
125#/50# |
15.1/5.6 |
13.9/5.2 |
Applications
Tinplate is primarily used for packaging foodstuffs and beverages, but it is also used in containers for oils, grease, paints, polishes, chemicals and many other products. Aerosol containers and caps and closures are also made from ETP.
FAQ:
Q1. What are your company's main products ?
A1: Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.
Q2. How do you control quality ?
A2: Mill Test Certification is supplied with shipment, Third Party Inspection is available. and we also get ISO,SGS.
Q3. What are the advantages of your company ?
A3: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.
Q4. How many coutries you already exported ?
A4: Exported to more than 50 countries mainly from America, , UK, Kuwait, Egypt, Turkey, Jordan,India, etc.
Q5. Can you provide sample ?
A5: We can provide the samll samples in stock for free, as long as you contact us.
Customized samples will take about 5-7days.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.