Physical Properties

Density: 0.289 lbs/in3 8.00 g/cm3

Electrical Resistivity: ohm-cir-mil/ft: At 70 °F (21 °C): 469.0

Specific Heat: BTU/lb-°F (J/g-°C):
32 - 212 °F (0 - 100 °C): 0.12 (0.50)

Thermal Conductivity: BTU-in/hr-ft2-°F (W/m•K):
32 - 212 °F (0 - 100 °C): 112 (16.2)

Mean Coefficient of Thermal Expansion: µin/in-°F (µm/m-°C)
32 - 212 °F (0 - 100 °C): 8.78 (15.8)
32 - 599 °F (0 - 315 °C): 9.00 (16.2)
32 - 1000 °F (0 - 540 °C): 9.39 (16.9)
32 - 1200 °F (0 - 650 °C): 10.6 (19.1)

Modulus of Elasticity: ksi (MPa)
28 - 29 x 103 (193 - 200 x 103) in tension
Magnetic Permeability, H = 200: Annealed
 

What are the edges of 310S stainless steel coils?
The look of an untrimmed edge following hot or cold rolling, annealing, or pickling is known as the mill edge. Usually, it left a 10 to 15 mm uneven pinhole line on the edge side.

Slit/slitting edge refers to the uneven pinhole line that our slitting machine will trim.

What is the typical 310S stainless steel coil marine packaging?
Customary maritime export packaging:
Wooden Pallet or Wooden Case + PVC Film + Strap Banding + Waterproof Paper Winding;
tailored packaging to your specifications (printing of a logo or other material is permitted);
Additional customized packaging will be created upon request from the client;
There are two options: eye to wall and eye to sky;
By air or water; By international express: DHL, UPS, FEDEX, EMS, and our own express line;
Port of shipment: Shanghai, Ningbo, or upon request.

Samples