Manufacturer St52 Q235b Sa285 Gr C Boiler Plate for Construction Material
Manufacturer St52 Q235b Sa285 Gr C Boiler Plate for Construction Material
ST 52 is a structural steel grade that is widely used. A superb chemical composition of carbon, silicon, manganese, phosphorous, and sulfur is used to create a St 52 Steel Plate. Because of the material incorporated in these plates, they are more resistant to corrosive and oxidative media. The St52 Plate is intended for thicknesses of 6mm and more. These plates offer improved pitting and crevice corrosion resistance. They offer high stability and support for a variety of applications. St52-3 Plate is a low manganese carbon grade that does not place additional strain on following modules. These tough plates may be simply welded in place using regular techniques. When compared to a St52 plate, the flexible St52 3 Steel has somewhat lower strength and tolerance. These lightweight components meet a variety of national and international requirements. St52 Steel Sheet is available in thicknesses ranging from 6mm to 0.5mm. These sheets do not give stability or visual appeal to various components.
St52 Plate Thickness
| Nominal thickness (mm) | 16 - 40 | to 16 | 40 - 63 | 80 - 100 | 63 - 80 | 150 - 200 | 100 - 150 |
| ReH - Minimum yield strength (MPa) | 345 | 355 | 335 | 315 | 325 |
| Nominal thickness (mm) | 3 - 100 | to 3 |
| Rm -Tensile strength (MPa) | 490-630 | 510-680 |
| Nominal thickness (mm) | ≥63﹤100 | ≥1＜1.5 | ≥0.5 ＜1 | ≥2﹤2.5 | ≥1.5＜2 | ≥3＜40 |
≥2.5＜3
|
≥40﹤63 |
| A - Minimum elongation Lo = 5,65 √ So (%) Longitudinal |
20 |
15 |
14 |
17 |
16 |
22 |
18 |
21 |
Difference Between St52 And St52-3
- The St52 grade is intended to be slightly stronger than the St52-3 grade.
- The St52-3 grade of low carbon manganese has better weldability than the St52 grade modules.
Samples
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.