Hot Rolled S235jr 16mo3 13crmo4-5 Mild Carbon Steel Plate Price
Hot Rolled S235jr 16mo3 13crmo4-5 Mild Carbon Steel Plate Price
EN 10025 S235JR material (1.0038 steel) is a hot rolled non-alloy structural steel grade that meets European standards. It possesses high plasticity, toughness, and weldability, as well as some strength and cold bending qualities. Please consult the tables below for specifications, datasheets, and equivalents.
S235JR material significance (designation):
“S” is short for structural steel;
“235” refers to the minimum yield strength (MPa) for the steel thickness ≤ 16mm;
“JR” indicates the quality grade related to charpy impact test energy value ≥ 27 J, at room temperature 20℃;
“C” means the material is suitable for cold flanging, cold bending, cold forming or cold drawing, e.g. S235JRC (1.0122).
1.0038 is the steel number of this steel.
The following are the general delivery criteria for carbon steel S235JR:
+AR denotes "as-rolled" delivery without special rolling and/or heat treatment.
+N denotes "normalized or normalized formed."
"thermomechanically formed - TMCP" is denoted by +M.
The "cold work hardened" symbol is +C.
+A indicates that the material has been soft annealed.
+AT indicates that the steel has been solution annealed.
Example 1: The steel name is S235JR+AR (1.0038+AR) or S235JR+N (1.0038+N) when the delivery condition is as-rolled or normalized.
S235JRC steel, for example, indicates that the material is appropriate for cold flanging, cold bending, cold forming, or cold drawing.
Example 3: If S235JRC steel is delivered cold work hardened, it is referred to as S235JRC+C (1.0122+C).
The following table shows (1.0038) S235JR chemical composition based on ladle analysis.
| Chemical Composition (ladle analysis) %, ≤ | |||||||||
| Standard | Grade | Steel Grade (Steel Number) | C | Si | Mn | P | S | Cu | N |
| EN 10025-2 | S235 steel | S235JR (1.0038) | 0.17 | – | 1.40 | 0.035 | 0.035 | 0.55 | 0.012 |
| S235J0 (1.0114) | 0.17 | – | 1.40 | 0.030 | 0.030 | 0.55 | 0.012 | ||
| S235J2 (1.0117) | 0.17 | – | 1.40 | 0.025 | 0.025 | 0.55 | – | ||
Material density: 7.85g/cm3
Melting point: 1420-1460 °C (2590-2660 °F)
S235JR Steel (1.0038 Material) Mechanical Properties
The yield strength, tensile strength, elongation, and Charpy impact test are listed in the following data sheet.
EN 1.0038 material Brinell hardness: ≤120 HBW
Charpy impact value: ≥ 27J, at room temperature 20 ℃.
Yield Strength
| Yield Strength (≥ N/mm2); Dia. (d) mm | |||||||
| Steel Series | Steel Grade (Material Number) | d≤16 | 16< d ≤40 | 40< d ≤100 | 100< d ≤150 | 150< d ≤200 | 200< d ≤250 |
| S235 | S235JR (1.0038) | 235 | 225 | 215 | 195 | 185 | 175 |
| Tensile Strength (≥ N/mm2) | |||||
| Steel Series | Steel Grade (Material Number) | d<3 | 3 ≤ d ≤ 100 | 100 < d ≤ 150 | 150 < d ≤ 250 |
| S235 | S235JR (1.0038) | 360-510 | 360-510 | 350-500 | 340-490 |
Elongation
| Elongation (≥%); Thickness (d) mm | ||||||
| Steel Series | Steel Grade | 3≤ d≤40 | 40< d ≤63 | 63< d ≤100 | 100 < d ≤ 150 | 150 < d ≤ 250 |
| S235 | S235JR | 26 | 25 | 24 | 22 | 21 |
EN 1.0038 material can be made into many steel products, such as H beam, I beam, steel channel, steel plate, steel angle, steel pipe, wire rods, and nails, etc. and these products are widely used in general requirements for welded structures and parts such as bridges, transmission towers, boilers, steel structure factories, shopping centers and other buildings, etc.
Samples
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.