AA4C Automatic Rollover gantry Drive Through No Limited Washing Length 3 Brushes Bus Truck Washer Rollover Washing Machine AA-RO1
AA4C automatic rollover 3 brushes bus truck washing machine AA-RO1
Introduction
quality system certification/CE certification). It is mainly used for all-round high-pressure washing and profiling brushing of the surfaces of different types of public transportation vehicles, large buses, large passenger cars, and other vehicles. The operation interface adopts an advanced touch screen control system, with full Chinese display. It can also implement human-machine
dialogue, and has automatic and manual control functions. The operation is simple. The computer operating system can automatically
adjust the optimal washing distance between the brushes and the body cleaning surface according to different vehicle models (length, width, and height), ensuring the pressure and cleaning effect of the brushes on the vehicle, and achieving complete inclusive cleaning of the vehicle without leaving any dead corners. The device also has fault automatic detection and alarm system, vehicle appearance automatic recognition system, fault troubleshooting method display system, car wash counting system,
and winter automatic drainage function to prevent equipment from being damaged by low temperature freezing. The design is with Multiple protection measures, with a high degree of automation and strong reliability! The main electronic components are all of internationally renowned brands, with stable performance and low failure rate. Multiple safety protections are adopted in design and process to ensure the long-term normal operation of the equipment. Its functions fully meet the international advanced level.
Features
* It has the function of fully automatic cleaning of the front, rear, top and outer surfaces of both sides, and can
automatically avoid the rearview mirror.
* It has the cleaning function of combining automatic cleaning and manual control, and can safely avoid the accessories on the
vehicle.
* It has manual and inching operation functions of each station.
It has perfect system protection function. In case of fault, the system can be shut down in an emergency, and alarm and fault
content display can be performed at the same time.
* It has the function of selecting water for cleaning and adding detergent for cleaning.
* The water used to wash the vehicle is recycled to reduce the water consumption for washing. (Note: water recycling system is optional)
The equipment has perfect fault self diagnosis function, comprehensively monitors and displays the status of the system, and makes correct judgment on the fault position and type.
The equipment has perfect safety protection function.
Specification
| Applicable models: | Various types of bus vehicles |
| Washing bus size: | No limitation*≤3*≤4(L*W*H) |
| Machine size: | 12m ×5m×5.3m 12M*5M*5.3M (L*W*H) |
| Power needed: | 45KW |
| Brushes: | 3brushes |
| Washing capacity : | 2-3min /vehicle |
| Power supply: | 380V 50Hz 3phase |
| Power consumption: | 0.5 kwh/bus |
| Water consumption: | 150L—200L/bus |
| Air pressure: | 0.7Mpa |
| Washing mode: | Standard washing, Detergent |
| Operation mode: | Automatic control, manual control |
| Drying blowers : | 5.5kw(optional) |
1.Shipment
2.Sucessful cases
3.Related Products
4.Factory Visting
5.Contact Us
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.