White High Frequency Lightning Surge Protector , Antenna Surge Protector 10kA
Overview
EPC series high frequency feeder lightning protector is designed to protect satellite receivers in microwave communication stations and mobile base stations from lightning overvoltages caused by antennae of subsequent receiving equipment.
Technical parameters
Product Model EPC75-2000F
**** Continuous working voltage Uc 75V
SPD test category C2
Rated discharge current Isc (8/20μs) 10kA
Voltage protection level Up to 0.5kV
Operating frequency 50MHz~2000MHz
Insertion loss ＜0.5dB
Size Φ25mm×70mm
VSWR ≤1.2
Interface type/characteristic impedance F/75Ω
Housing material stainless steel
Temperature range: -40℃~+70℃.
Humidity range. 30%~85% (25℃)
Connection method
1,External coaxial wire is connected to the "IN" terminal, and the "OUT" terminal is connected to the input terminal of the protected equipment.
2,The ground wire is connected reliably with PE wire.
Caution
1,This product is only suitable for indoor use.
2,Do not install in thunderstorm.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.