Type Editor Podcast
Direct lightning rod / special lightning rod / advance pre-discharge lightning rod
Direct lightning rod
Direct lightning rod
Optimization of lightning rod
Optimization lightning rod
Advance pre-discharge lightning rod
Early pre-discharge lightning rod
Direct lightning strike
Applicable to petrochemical warehouses, radio and television, gas stations, construction buildings, beacon stations, communication base stations, meteorological stations, military bases, radar rooms, bank buildings.
Special
Suitable for higher building building microwave communication station, radar base station, beacon station, communication base station, military base, radar room, bank building, astronomical weather station and other important places.
Pre-discharge
When the lightning rod is cut off by lightning, the main body of the receiver receives the flash, through the lightning waveform processing device, using the shell and the center grounding rod between the 3mm gap, constituting a coupling capacitor, while the shell through the inductor coil grounding (center grounding rod) When the downstream inducer is close to the receiver, due to the extremely high frequency. The inductor is in an open-circuit state, the capacitor presents a short-circuit characteristic for high frequencies, so under the action of the coupling capacitor, the electric field strength on the surface of the catch flash rapidly increases until the avalanche process is triggered, so that the lightning current can be released into the ground in an instant, thus effectively achieving the purpose of lightning protection and safety.