24v DC motore wing in wing wide passage flap barrier turnstile

A flap barrier turnstile is used when both heightened security and electronic optical turnstile access control are desired. These turnstiles provide a barrier to entry with a very pleasing and inviting appearance. A flap barrier turnstile is often used in office buildings and reception areas, lobbies, modern subway and transit stations, and other high-end building entrances.

1. GB 304 stainless steel sheet metal forming, beautiful, durable
2. Dimensions : 420 × 330 × 980 (mm)
3. Channel width: less than 550 (mm);
4. Brake lever steering : one-way, two-way (optional)
5. Control mode: manual/ automatic (optional)
6. Can mount a variety of control devices: metal security gate/ IC card/ ID card/ card/ barcode card, etc.
7. Working environment: indoor(outdoor use shall stand awning)
8. Ultra quiet design: Mechanical design using third-generation silent, smooth operation no noise impact;
9. Super bright passage indicator: directional design of ultra- bright LED lights to indicate a more eye-catching ;
10. Automatic access function: the reader automatically run after the brake lever to unlock certain angle, automatically bring people through the gates ;
11. Multiple modes of function: by setting the switch can be set to the gates normally open , normally closed two modes of operation ;
12. Access memory function: After several pedestrians card, access gates opportunity to remember the number, until the entire passage of pedestrians closing;
13. Power off the pole, the power from the bar features: gates automatically after power brake lever to facilitate evacuation fall to meet fire safety requirements ; ( automatic type )
14. Anti-collision function: no credit card pedestrian push the brake lever , lock gates ;
15. Remote control: RS485 card can be accessed by computer or TCP to RS485 remote control gates ;
16. Automatic reset function: by credit card is not specified , within the time gates back in situ cancel access .