Pressure Swing Adsorption Membrane Nitrogen Generator Anti Explosion

Psa Nitrogen Plant Flow

(1) .air compressing system, this system includes air compressor, air buffer tank, the purpose of this syetem is to compress the normal pressure air to high pressure air.

(2). air purification system, this system includes degreaser, refrigerated(adsorption)dryer,ultrafilter,active carbon filter,the purpose of this system is to remove dust,water and oil in the compressed air to make sure the compressed air will be clean and dry in the following steps.

(3). air buffer tank. This system includes air compressing buffer tank,the purpose of this system is to store the compressed gas to make sure the stable supply of gas for O2/N2 separation system,mainly composed of air tank and valves.

(4). Adsorption separation system,this system includes adsorber tower,Program control valve,controller,analysis meter, also this is the most important system for all the production line, the purpose of this system is to produces N2 through PSA technology,composed of two adsorption towers filled with carbon molecular sieve and automatic control valves

(5). buffering and emptying system,this system includes Nitrogen gas buffer tank,flfter,pressure regulating valve,flow gauge, emptying system.the purpose of this system is to store the finished N2 and regulate the pressure for the request,and change the flow of the N2.

Advantages of PSA nitrogen generator:
1. Skid-mounted design, small required installed area.
2. Energy saving, low operationg cost.
3. Easy to operate, turn on and off according to the oxygen demand.
4. Long running time, low maintenance cost.
5. Automatic control, completely unattended.
6. Cylinder filling station (Optional).
7. Installation is very easy, provide technical support at any time.

​

Psa Nitrogen Plant Application:

• Food and beverage industries
• Aircraft& motor vehicle tires
• Chemical and petrochemical industries
• Electronics industry
• Metallurgy/heat treatment
• Pharmaceutical industry

FAQ

Q1. Are you a manufacturer or a trading company?
A1: We are a professional manufacturer in the gas industry for more than 20 years.

Q2. What are your terms of payment?
A2: T/T 40% as deposit, and 60% T/T or L/C at the sign before delivery. Welcome to inspect the products before you pay the balance.

Q3. Can you produce according to the client's requests?
A: Yes, we can produce by your request or technical drawings. We can build the molds and fixtures.

Q4. How about your delivery time?
A4: Generally 30-45 days.