High Purity Membrane Air Separation Molecular Sieves 50hz Liquid Nitrogen Plant
High Purity 99.9999% Membrane Nitrogen Generator Long Molecular Sieves Life
Membrane Nitrogen Generator Working Principle
Under a certain pressure, using the large difference of the diffusion rate between nitrogen and oxygenfrom the air in the carbon molecular sieve, a large number of oxygen is adsorpted by carbon molecular sieve, while nitrogen is collected in a short time, to achieve separation of oxygen and nitrogen. The adsorption capacity of carbon molecular sieve is significantly different with different oxygen pressures, reducing the pressure will release oxygen from carbon molecular sieve, this make carbon molecular sieve regeneration, then can be used repeatedly. Using two adsorption towers, one for adsorption and nitrogen generator, the other for desorption and recycling. They switch with each other, thus continuous output of high-quality nitrogen.
Nitrogen system
1 air compressor
2 Compressed air pretreatment system (dryer and multistage filters)
3 Air buffer tank
4 PSA nitrogen generator
5 Nitrogen gas buffer tank
6 Control system(including man-machine control interface)
7 Instrument and meter (installed in nitrogen generator)
| Item | Technical | Remark |
| N2 flow rate | 1200Nm3/h | Standard state |
| N2 purity | ≥95.0% | non-oxygen content |
| N2 outlet pressure | 0.1~0.6Mpa | Gage pressure, adjustable |
| N2 outlet dew point | ≤ 45 °C | Atmospheric dew point |
Advantages of PSA nitrogen generator:
1. Skid-mounted design, small required installed area.
2. Energy saving, low operationg cost.
3. Easy to operate, turn on and off according to the oxygen demand.
4. Long running time, low maintenance cost.
5. Automatic control, completely unattended.
6. Cylinder filling station (Optional).
7. Installation is very easy, provide technical support at any time.
Psa Nitrogen Plant Application:
- Food and beverage industries
- Aircraft& motor vehicle tires
- Chemical and petrochemical industries
- Electronics industry
- Metallurgy/heat treatment
- Pharmaceutical industry
FAQ
Q1. Are you a manufacturer or a trading company?
A1: We are a professional manufacturer in the gas industry for more than 20 years.
Q2. What are your terms of payment?
A2: T/T 40% as deposit, and 60% T/T or L/C at the sign before delivery. Welcome to inspect the products before you pay the balance.
Q3. Can you produce according to the client's requests?
A: Yes, we can produce by your request or technical drawings. We can build the molds and fixtures.
Q4. How about your delivery time?
A4: Generally 30-45 days.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.