Refrigerated Air Dryer For Air Compressor Screw Compressor

Air Dryer, according to the principle of refrigeration dehumidification, the compressed air is forced through the evaporator heat exchange and cooling and make air oil and water in the compressed air after isobaric cooling, then condense into liquid water and oil with dust, through excluding system automatic drainer to get clean compressed air.

Water cooling type

1. Inlet temperature:≤80℃(≤45℃)
2. Cooling method: Water-cooling
3. Dew point:2-10℃
4. Inlet pressure:0.6-1.0Mpa
5. Pressure drop:≤5% of working pressure
6. Cooling water inlet temperature:≤32℃
7. Cooling water inlet pressure:0.2-0.4Mpa
8. Refrigerant: R22/R134a/R32/R407c

> Advanced 3-in-1 compressed air dryer system features modes for pre-refrigeration, evaporation, and air moisture separation
> Remove moisture from your compressed air lines. Prevent too much moisture in compressed air, avoid problems like corrosion of equipment and freezing of outdoor compressor air lines.
> High efficiency pre-refrigeration system, Accommodates compressors up to 21~20000 CFM, 145 PSI max pressure
> Recommended operating pressure: 115PSI.

Main specialties

• Using environmental protection new refrigerant R134a,R407C, R410A.
• Heat exchanger with stainless steel housing.
• Condenser suction filter standard configuration.
• Ambient temperature ranges from 2 ℃ to 43℃
• A wide range of effective temperature bands.