GJXH-2B6 Indoor Drop Cable FTTH Fiber Optic Cable​

▌Product description

Fiber Optic Drop Cable access to the use of dish-shaped optical cable (indoor wiring) is the optical communication unit (fiber) in the center, placed on both sides of two parallel non-metallic reinforcement (FRP) or metal reinforcing member, and finally extrusion black or color poly Vinyl chloride (PVC) or LSZH (LSZH, low smoke, halogen-free, flame retardant) jacket.2core fiber optic cable

▌Application

• Connection of optical communication network;
• Connection from tower to machine room, tower to building and between buildings;
• Replace flexible optical cable as indoor wiring;
• Realize the application under engineering emergency and special conditions.

▌Characteristics

• Compact structure, flat shape and small size (2.0mmx3.0mm), which is more suitable for indoor distribution.
• Based on the miniaturized structure, the flexibility and portability are better realized. Optical cables are more suitable for small bending and small space.
• The setting of two reinforcing cores makes the optical cable have better tensile performance.
• The unique V-groove structure design on both sides makes the optical cable have better lateral pressure resistance. The side pressure of the optical cable is mainly borne by the stiffener, and the middle optical fiber is basically not stressed. Therefore, it can bear the pressure of more than 10000n / 10cm, and the optical fiber attenuation has no obvious change.
• The tight wrapping structure can effectively reduce the size and weight of the optical cable and reduce the manufacturing cost on the premise of ensuring various performances.
• The unique flat structure is easier to realize on-site termination and docking, which is conducive to reducing the installation and connection cost.
• V-groove treatment on both sides makes it more convenient for optical cable stripping and connection.
• Fiber dry structure, no need to wipe fiber paste during connection, which is more in line with environmental protection requirements.
• The optical cable structure is compact and meets the miniaturization requirements. When threading and wiring, it can make more effective use of the existing pipeline resources.
• There is no ointment in the optical cable and has certain tensile properties, which is more suitable for generic cabling in the building.

▌General Specifications:

 

▌Fiber Specifications:

 

Fiber style			Unit	SM G652D	SM G657A1	SM G657A2
condition			nm	1310/1550	1310/1550	1310/1550
attenuation			dB/km	≤0.36/0.23	≤0.35/0.21	≤0.35/0.21
Dispersion		1310nm	Ps/(nm*km)	≤18	≤18	≤18
		1550nm	Ps/(nm*km)	≤22	≤22	≤22
Zero dispersion wavelength			nm	1312±10	1312±10	1300-1324
Zero dispersion slope			ps/(nm²×Km)	≤0.091	≤0.090	≤0.092
PMD Maximum Individual Fiber			[ps/√km]	≤0.2	≤0.2	≤0.2
PMD Design Link Value			ps/(nm²×Km)	≤0.08	≤0.08	≤0.08
Fiber cutoff wavelength λc			nm	≧1180,≤1330	≧1180,≤1330	≧1180,≤1330
Cable cutoff wavelength λcc			nm	≤1260	.....	.....
MFD	1310nm		um	9.2±0.4	9.0±0.4	9.8±0.4
	1550nm		um	10.4±0.8	10.1±0.5	9.8±0.5
Step(mean of bidirectional measurement)			dB	≤0.05	≤0.05	≤0.05
Irregularities over fiber length and point discontinuity			dB	≤0.05	≤0.05	≤0.05
Difference backscatter coefficient			dB/km	≤0.03	≤0.03	≤0.03
Attenuation uniformity			dB/km	≤0.01	≤0.01	≤0.01
Cladding diameter			um	125.0±0.1	124.8±0.1	124.8±0.1
Cladding non-circularity			%	≤1.0	≤0.7	≤0.7
Coating diameter			um	242±7	242±7	242±7
Coating/chaffinch concentrically error			um	≤12.0	≤12.0	≤12.0
Coating non circularity			%	≤6.0	≤6.0	≤6.0
Core/cladding concentricity error			um	≤0.6	≤0.5	≤0.5
Curl(radius)			um	≥4	≥4	≥4

 

 

▌Product mix

 

 

 

 

▌Standard Color Identification of Fiber

 

No.	1	2	3	4
Color	Blue	Orange	Green	Brown

 

▌Cable Design

 

Item	Description
Model No	GJXH/GJFXH
1. Fiber count	1 Core , 2 Core, 4 Core
2. Cable Diameter	3.0*2.0mm
3. Cable Weight	11.5KGS/9.5KGS
4. Strength member
- Material	Steel/FRP
- Diameter	0.45mm
5. Outer Sheath
- Material	LSZH (Black/white)
6. Sheath marking
- Type of marking	Laser printing

 

 

▌Packing

FAQ

Q1: Where is your factory ?
A1: Our factory is located in DONGGUAN City, GUANGDONG Province, China.
Q2: How long has your company been doing this?
A2: More than 20 years.We are not only produce fiber optical cable but also produce optical fiber and related tools .
Q3: How about the cable's quality?
A3: Our factory is approved by ISO9001 quality management system and including STARF,CE,CPR,TLC certifications at list.We have a series of equipment and instruments to make sure reliable quality of our products.
Q4: Can you produce cable as our requirements?
A4: Of course .We can supply different types of products according to your requirements with reasonable prices .
Q5: Do you accept the OEM order and how many is the MOQ?
A5: Yes,we warmly welcome your OEM order.To achieve customer's satisfaction,we accept sample order, even one Piece.