FTP CAT5e Lan Cable With Shielding Layer Copper Line 24awg 1000ft
FTP CAT5e Lan Cable With Shielding Layer Copper Line 24awg 1000ft
▌ Product description
- Super class 5 wire adopts 24awg pure copper-clad aluminum as conductor, which has the characteristics of oxidation resistance and long service life.
- The super five network cable has smaller attenuation, less crosstalk, higher ACR and structure return loss, smaller delay error and better performance. Super-5 cable is mainly used for Gigabit Ethernet (1000Mbps).
- Super class 5 wires can be divided into unshielded twisted pair (UTP) and shielded twisted pair (FTP). The outer layer of shielded twisted pair is coated with aluminum platinum to reduce radiation, but it can not completely eliminate radiation. The price of shielded twisted pair is relatively high, and the installation difficulty is higher than that of unshielded twisted pair.
▌Construction
Connectix Cat
- Application structured cabling, CCTV system, Telecom project etc.
- Exceeds TIA/EIA-568B.2,ISO/IEC 11801 ,
- Pass Fluke Test 100M. 100Mbps/1000Mbps,100Base-T,1000Base-T standard.
- Can be used for voice, integrated service data network (ISDN).
- Long transmission distance, small transmission loss, wear resistance, resistance to pressure.
▌Appliacation
- Computer network cabling project
- It can be used for circuit conversion and connection of communication equipment and other electronic equipment. The product is equipped with wiring rack / module / computer, etc. the docking relationship requires the use of connectors of the same standard series. Applied to LAN equipment, data communication, office computer Internet access, generic cabling (mainly used for network interface information point jump / transfer, etc.)
▌Parameter
| onstruction | Indoor generic cabling (FTP) category 305m CCA line 24awg standard Ethernet Cat5e Lan cable |
| Operating temperature (T-T) | -20˚C to +70˚C |
| Conforms to | IEEE 802.3: 10Base-T, 100Base-T, 1000 Base-T standards; ANSI/TIA 568C; ISO/IEC 11801; RoHS2002/95/EC |
| Fire Rating | Cca,s1.d0,a1 |
| Inner Conductor | 24 AWG plain copper |
| Insulation | High density polyethylene |
| Colour Code | Pair 1: White/Blue-Blue/White Pair 2: White/Orange-Orange/White Pair 3: White/Green-Green/White Pair 4: White/Brown-Brown/White |
| Jacket | FR-LSZH |
| Overall Diameter | 5.4 +/- 0.4 mm |
| Min. Bending Radius Installation | 44mm |
| Min. Bending Radius Installed | 22mm |
| DC Resistance | < 9.4 Ω/100 m |
| Velocity Ratio | 69% |
| Installation temperature (T-T) | 0˚C to +50˚C |
Mechanical Properties
| Bending radius | Installation | 8 x D |
| Installed | 4 x D | |
| Temperature range | During operation | -40°C to + 85°C |
| During installation | -15°C to + 50°C | |
| Fire load | 4 pair | 515 MJ/km |
| Maximum tensile load | During operation | No load |
| During installation | 130 N |
Electrical Properties at 20°C
| DC loop resistance | £ 158 Ω/km | |
| Resistance unbalance | £ 2% | |
| Insulation resistance | (500 V) | ³ 5000 MΩxkm |
| Capacitance | at 800 Hz | Nom. 43 nF/km |
| Capacitance unbalance | (pair to ground) | £ 1500 pF/km |
| Mean Characteristic impedance | @ 100 MHz) | 100 ± 5 Ω |
| Nominal velocity of propagation | 0,75c | |
| Propagation delay | £ 450 ns/100 m | |
| Delay skew | £ 15 ns/100 m | |
| Transfer impedance | at 1 MHz | £ 10 mΩ /m |
| at 10 MHz | £ 8 mΩ /m | |
| at 30 MHz | £ 10 mΩ /m | |
| Coupling attenuation | ³ 85 dB | |
| Segregation classification | Acc. to EN 50174-2 | “D” |
▌Nominal Transmission characteristics at 20°C
|
F
(MHz) |
Attenuation
(dB/100m) |
NEXT
(dB) |
ACR
(dB/100m) |
Return loss
(dB) |
PS-NEXT
(dB) |
PS-ACR
(dB/100m) |
ELFEXT
(dB/100m) |
PS-ELFEXT
(dB/100m) |
| 1 | 2,1 | 90 | 88 | 87 | 85 | 85 | 82 | |
| 4 | 4,0 | 90 | 86 | 27 | 87 | 83 | 85 | 82 |
| 10 | 6,3 | 90 | 84 | 30 | 87 | 81 | 79 | 76 |
| 16 | 8,0 | 90 | 82 | 30 | 87 | 79 | 75 | 72 |
| 20 | 9,0 | 90 | 81 | 30 | 87 | 78 | 73 | 70 |
| 31.25 | 11,4 | 90 | 79 | 30 | 87 | 76 | 69 | 66 |
| 62.50 | 16,5 | 86 | 70 | 30 | 83 | 67 | 63 | 60 |
| 100 | 21,3 | 83 | 62 | 30 | 80 | 59 | 59 | 56 |
| 155.00 | 24,2 | 81 | 57 | 26 | 78 | 54 | 57 | 54 |
| 200.00 | 31,5 | 78 | 47 | 25 | 75 | 44 | 53 | 50 |
| 250.00 | 35,8 | 77 | 41 | 25 | 74 | 38 | 51 | 48 |
| 300.00 | 47,1 | 73 | 26 | 23 | 70 | 23 | 47 | 44 |
| 600.00 | 60,1 | 71 | 11 | 20 | 68 | 8 | 44 | 41 |
▌Product mix
 |
 |
▌Panking
 |
 |
Cable weight | Gross weight | |||||
| 9.3kg | 10kg | |||||||
| Box size (CM) | Specifications | |||||||
| 21.5×35×35 | 305m/box | |||||||
▌Application scenario
 |
 |
 |
 |
| Network TV | Desktop computer | Notebook computer | Printer |
 |
 |
 |
 |
| Router | Set top box | Cabinet | Camera |
▌Frequently asked question (FAQ)
Q: Are you a cable and wire manufacturer?
— Yes, we are a professional wire and cable manufacturer.
Q: Can you offer a discount on cables?
— The price is negotiable according to the specification and quantity.
Q: Can you offer FREE samples?
— Yes,FREE samples are available, you just take care of the freight fee.
Q: What about your MOQ?
— Usually, our MOQ is 5000 Meters, but we’ d love to talk about your MOQ.
Q: Do you accept customize cables?
— Yes, we are more than happy to make OEM and ODM for you.
Q: How long is the lead time?
— Usually it’s about 10-14 days.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.