ZT-JGQG6S Fiber Laser Cutting Machine For PCD PCBN CVD Sapphire PDC Carbide Ceramics
ZT-JGQG6S Fiber Laser Cutting Machine For PCD/PCBN/CVD/Sapphire/PDC/Carbide/Ceramics
Technical Parameters:
|
Power supply requirements |
380V50Hz, Five-core four-square power cord |
|
Working environment |
Room temperature 20~40℃, humidity ≦60%, away from oil source |
|
Cooling Mode of Machine |
Adopt dual temperature cooling system , laser cutting head cooled by room temperature water. Laser cooled by 22℃cooling circulating water, and for manufacturing workpiece cooled by purify oil-free compressed air. |
|
Laser Source |
Fiber laser |
|
Duty Ratio |
1~100% |
|
Frequency |
1-2000 Hz |
|
Power percentage |
1%~100% |
|
Four Axis stroke |
300*300*50mm A-Axis 0±30° |
|
Maximun power output |
3000W |
|
Positioning accuracy |
≦± 0.005mm |
|
Repeat positioning accuracy |
≦± 0.005mm |
Daily maintenance and maintenance
1. Check the operation of the laser carefully before turn on daily, check the equipment button indicator lamp, stop the ammonium button key switch is not normal.
2. check the circulating water level of water cooler water tank, if not added in time.
3. Check protective lens for damage before daily cutting.
4. Clean up the dust and debris inside the worktable after each shift is completed.
5. After one year of using , the machine tool and worktable should be adjusted regularly to ensure the cutting accuracy of the machine tool.
If the equipment is not in use for a long time, please apply butter to the moving parts and rust-prone parts of the machine tool to prevent rust.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.