Matt Silver 6063 T5 Anodized Aluminium Profiles For Window And Door

Specification

Introduction

Aluminum or aluminum alloy products are used as anodes in electrolyte solution, and the process of forming aluminum oxide film on the surface of the aluminum and aluminum alloy is called anodic oxidation treatment of aluminum and aluminum alloy. After anodization, the surface of aluminum can produce several microns - hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decoration have been obviously improved and improved.

The aluminum oxide film is a porous membrane. Whether it is coloured or not, it must be closed before being put into use, so as to improve its corrosion resistance and weatherability. There are three kinds of treatment methods, namely, high temperature hydration reaction closed, inorganic salt closure and organic matter closure.

More than 10 containers are exported to many different countries,Nigiera,Ghana,Congo,Togo,Benin,Mauritius,Gambia,Libya at Africa,Bolivia,Chile,Argentina,Ecuador,Mexico,Colombia at South America and so on. 

We have molds for more than 400 models of alumimun profiles used for windows,doors,furnitures,general profiles including round tube,rectangle Pipe,Square pipes and so on. 

The thickness are between 0.6mm to 1.5mm.

We can send you catalog with drawings,we can open molds for you freely if you can not find the models which you need in our catalog as long as you offer us your CAD drawings or small samples.

Product Picture