48V 105Ah IP67 LiFePO4 Marine Boat Propulsion Batteries: Featuring Magnet Power Off Switch

48V 51.2V 105Ah IP67 LiFePO4 Marine Boat Propulsion Batteries: Featuring Magnet Power Off Switch

Supports 20 batteries parallel connections *51.2v 105Ah.

Special features:

Linkage with the BMS

• Normal operation: When the magnet approaches the Hall switch, the BMS recognizes it as "on" and allows the battery to be charged and discharged.
• Triggering power cut - off:
  When the magnet is removed (e.g., removed manually or separated due to the device tilting), the Hall signal disappears, and the BMS cuts off the main circuit within seconds.
  Combined with the built - in protection of the BMS (over - charging, over - discharging, over - temperature), double safety protection is achieved.

Specifications of Marine Propulsion Lithium Batteries :

1. Built-in lifepo4 prismatic cells 3.2V 105Ah (16s1) 
2. 2C continuous discharge 
3. 1C max charge 

High power output system
200A continuous discharge: Support permanent magnet synchronous motor instantaneous start peak current
Low internal resistance design: ≤3mΩ, energy conversion efficiency > 98%
Parallel expansion capability: Support 4 groups of parallel, to achieve 600Ah/28.8kWh super capacity

Intelligent Battery Management System (BMS)
Eight protection functions: over charge/over discharge/over current/short circuit/over temperature/low temperature/balance/reverse connection
Hall magnetic switch: 0.01 seconds fast power off .

Marine Propulsion Systems
Function: Powers electric motors for yachts, fishing boats, and commercial vessels
Key Features:
▶ 100A Max Discharge Current (2C rate) for high-torque motor startup
▶ 4000+ Cycles (80% DOD) – 4x lifespan more than that of lead-acid batteries
▶ IP67 Waterproof design for submerged cabin environments

Why Choose Leadyo?

1. Marine-Grade Quality: 100% tested under simulated sea conditions (salt spray, vibration)
2. Global Support: Local agents in EU/US/AU for after-sales service
3. Sustainability: 95% recyclable materials, carbon-neutral packaging option