SIEMENS Siplace X Series 12mm SMT Feeder 00141271 New Condition Metal Material

SIEMENS Siplace X Series 12mm SMT Feeder 00141271 New Condition Metal Material

Product Advantages:

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

1. Smaller components.

2. Much higher component density (components per unit area) and many more connections per component.

3. Components can be placed on both sides of the circuit board.

4. Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

SMT Application:

1. Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

2. Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these SMT components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.

3. Nevertheless SMT components can be used for some home projects where they are applicable - where the SMT component leads and connections are not too small to manage with more traditional soldering irons and other tools.

Product Specification:

Supply Ability:
Supply new and used siemens spare parts for smt machine.

• 00321551-02 polia lisa, axis x F4; S20
• 00321607-03 polia lisa, axis Y F4; S20; S25; S27
• 00321213S05 unidade de posição F4; S20; S25; S27; D1-3; HS
• 00321215S10 pci, distribuição F4; S20
• 00318552-04 polia sincr. p/ axis x F4; S20
• 00116805-02 smema entrada F4;S20; S25; S27; HS
• 00320165S02 rolamento linear, axis z F4; S20; S25; HS50
• 00314164-01 pci, tcp/ ip F4; S20
• 00321525-02 pci, lighting da câmera F4; S20
• 00328842S03 trocador de bocal SP6/ nozzle 800 D1; D2; D3; X3
• TOPAS NCA 52 (LI) graxa, silicone, topas F4; S20; S25; S27; D1-3; HS
• FEDK 10P3101/10P5101;139963 sensor fotoeletrico sn6/ 100mA/ 30vdc/ PNP SIPLACE; WPC
• 00367793S02 válvula de ar dm2/dlm3 D1-3; X3; S27; HS60
• ILH-S8 sensor barreira de luz D1-3; X3; S27; HS60
• 03005191-02 magazine, p/ bocal D1; D3; X3; SX
• KD2-M5-A; 4087 engate rápido, femea F4; S20; S25; S27
• 00317711-01 correia sincr. 10T2,5/230 S20; F4; S25
• 00322822S03 (E) pci, controladora servo SIPLACE
• 00344489-01 pci, visão modular S25; S27; HS
• 00317856-02 bloco de fricção F4; S20
• 03001807-010701 trocador de bocal D3; X3; SX
• 231871; V183827-1-2 motor 24vdc/ 19:1, 12-16mm FEEDER; S
• 00341702S01 motor tensionador 3x8 FEEDER; S
• 00377140-01 malha proteção cabos F4; S20; S25; S27
• 03010670-02 filtro de linha D1-3; X3
• 03047283-02 sensor de bandeja WPC4; F4
• 00350834S01 motor 24vdc, removedor fita 24-32mm FEEDER; S
• 00322446S01 engrenagem puxador fitas FEEDER; S
• 00345183S01 painel controle 3x8mm FEEDER; S
• EX-11P; EX-11BD sensor fotoelétrico 150mm/ 10mA/ 24vdc FEEDER; TUBE
• 03050314S04 motor rotacionador DP/ CPP SX
• 03039099S05 guia do segmento, head CPP SX
• UB100-F77-E2-V31-Y233263 sensor ultrasonico SX
• 03081405S02 acionador pneum. SX
• 03038882-01 interruptor de segurança SX
• ST 142O; 14.5.53.7.01 sensor 6A/ 250vac c/ cabo D3; X3
• 00357795S01 unidade pneum. S20; F4; S25
• 03059666S03 (A) unidade de communic do alimentador SX
• 03055300S02 computador controlador, 627B D1; D2; X3
• 003052200S07 (A) pci, controladora portal SX
• 003057595;00376632-02 (E) proteção de head 2/4 HS50; HS60
• 00376631-02 (E) proteção de head 1/3 HS50; HS60

Stock Details: