120W Smartstop Car Tire Inflator Type-C Charging LED Lighting
Car Tire Inflator Temperature Protection Type-C Charging Port LED Lighting
Car Tire Inflator Features:
Using all-copper cylinder powder metallurgy gear permanent magnet motor, durable and fast heat dissipation, stable air volume up to 35L/min, noise less than 78 BD, tens of thousands of safety tests, precious tire pressure chip, accuracy +_0.1Kg/ Square centimeter, anti-noise, strong dynamic and quiet below 78BD, air flow of 35L/min, increasing the inflation efficiency of scarred tires by 3 times.
Car Tire Inflator Parameter:
| battery capacity | 8800mAh | Storage temperature | -20～60℃ |
| Operating temperature | -20~50℃ | Product Size | 150x129x37mm |
| inflation speed | Car tires (185/60/R15) about 5 minutes | charging port | Type-C |
| Inflatable tire time | Fully charged can be used continuously for 30 minutes. | Charging parameters | DC5V/2A |
| Instantaneous maximum current | 600A | USB output | DC5V/2A |
| Trachea size | The length of the trachea pulled out is 240mm (including the gas nozzle) | charging time | about 6 hours |
| Battery folder | Equipped with 1 rear power supply clip | LED lighting | 1 LED light |
Car Tire Inflator use skills:
1. Tighten the inflatable tube to the trachea socket;
2. Buckle the air nozzle on the tire air core and then buckle the pressure handle;
3. Press and hold the power switch, the remaining power of the device will be displayed at this time, press to select the inflation mode, then press to select the inflation unit, press + or - to adjust the tire pressure, press the button to start the air pump to inflate, and stop when it reaches the set value.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.