ECLAMP2410CPT FILTER RC(PI) 45 OHM/12PF SMD16 For T-FLASH MICROSD INTERFACES

Applications:For T-FLASH MICROSD INTERFACES
T-Flash / MicroSD Interfaces
MMC Interfaces
CDMA, GSM, 3G Cell Phones

The EClampM2410P is a combination EMI filter and line termination device with integrated TVS diodes for use on Multimedia Card interfaces.
This state-of-the-art device utilizes solid-state silicon-avalanche technology for superior clamping performance and DC electrical char-acteristics.
They have been optimized for protection of T-Flash/MicroSD interfaces in cellular phones and other portable electronics.
The device consists of six circuits that include series im-pedance matching resistors and pull up resistors as re-quired by the SD specification. TVS diodes are included on each line for ESD protection. An additional TVS diode connection is included for protection of the voltage (Vdd) bus. Termination resistor value of 45 Ohms is included on the DATO, DAT1, DAT2, DAT3, CMD, and CLK lines.Pull up resistors of 15k Ohms are included on DATO,DAT1, DAT2, and CMD lines while a 50k Ohm pull up is inlcuded on the DAT3 line. These may be configured for devices operating in SD or SPI mode . The TVS diodes provide effective suppression of ESD voltages in excess of +15kV (air discharge) and +8kV (contact discharge) per IEC 61000-4-2, level 4.
The EClamp2410P is in a 16-pin, RoHS/WEEE compliant, SLP4016P16 package. It measures 4.0x 1.6 x 0.58mm. The leads are spaced at a pitch of 0.5mm and are fin-ished with lead-free NiPd.

Environmental & Export Classifications

Most Popular Transient Suppressors

ECLAMP2410P.TCT
ECLAMP2410PQTCT
ECLAMP2410PTCT

CDSOT23-SM712
SZNUP2105LT1G
NUP2105LT1G
USBLC6-2SC6
PGB1010603MR
PGB1010603NR
USBLC6-2SC6Y
TPD1E10B06DPYR
SMBJ5.0A-TR
PGB1010603NRHF
SMBJ5.0CA-TR
SMBJ5.0A
SM712.TCT
SRV05-4.TCT
PGB1010603MRHF
SZNUP2105LT3G
SMBJ5.0A-E3/52
SMBJ15CA-TR
SMBJ12A-TR
SMAJ5.0CA-E3/61
SMBJ12CA-TR
SMBJ5.0CA
SMBJ15CA-13-F
SMBJ12A-E3/52
BAV99DWQ-7-F
SMBJ12CA
SRV05-4HTG-D
SM712-02HTG
SMBJ33A-E3/52
SMAJ5.0A