RoHS 40Gb/S QSFP+ Optical Gigabit SFP Transceiver Sfp Module Single Fiber 10km

Price Negotiable

Price: Negotiatable

MOQ: 1

Delivery Time: Negotiable

Brand: FONGKO

Product Description

Product Features

Supports 41.2Gb/s bit rates
Duplex LC receptacles
Hot pluggable QSFP+ form factor
Uncooled 4x10Gb/s CWDM transmitter
Applicable for10Km on Single Mode Fiber(SMF).
Built-in digital diagnostic functions
Low power consumption, < 3.5W
Unretimed XLPPI electrical interface
Operating case temperature: 0°C to 70 °C

Applications

40GBASE-LR4 40G Ethernet
Infiniband QDR and DDR interconnects
Client-side 40G Telecom connections
Other optical links

Absolute Maximum Ratings
Parameter	Symbol	Min.	Max.	Unit	Note
Supply Voltage	Vcc	-0.5	3.6	V
Storage Temperature	TS	-20	85	°C
Relative Humidity	RH	0	85	%
Damage Threshold, per Lane	DT	3.4		dBm

General Operating Characteristics
Parameter	Value	Unit	Note
Module Form Factor	QSFP+
Number of Lanes	4 Tx and 4 Rx
Maximum Aggregate Data Rate	41.2	Gb/s
Maximum Data Rate per Lane	10.3	Gb/s
Protocols Supported	Typical applications include 40G Ethernet, Infiniband, Fibre Channel, SATA/SAS3
Electrical Interface and Pin-out	38-pin edge connector ,Pin-out as defined by the QSFP+ MSA
Management Interface	Serial, I2C-based, 400 kHz maximum frequency

Parameter	Symbol	Min	Typ	Max	Units	Note
Bit Rate per Lane	BR			10.313	Gb/s	1
Bit Error Ratio	BER			10-12		2
Distance on SMF	D1			10	Km	3

Optical Characteristics (TOP(C) = 0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC=3.13 to 3.47 V)
Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λc		1270		nm
			1290
			1310
			1330
Ave. output power	PAVE	-7		+2.3	dBm
Difference in launch power between any two lanes (OMA)	DL			4	dB
Extinction Ratio	ER	3.5			dB
Peak power, each lane	PP			4	dBm
Dispersion penalty, each lane	TDP			3.5	dB
Average launch power of OFF transmitter, each lane	POFF			-30	dB
Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3	SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4					Hit Ratio = 5x10-5
Receiver
Operating Wavelength	λc	1264.5		1277.5	nm
		1284.5		1297.5
		1304.5		1317.5
		1324.5		1337.5
Stressed receiver sensitivity in OMA(OLSQ854XM-CDS1)	PSEN1			-11.5	dBm	3
Average Receive Power,each lane	PAVE	-11		+2.4	dBm
Receiver Reflectance	Rrx			-12	dB
LOS Assert	Pa	-30			dBm
LOS De-assert	Pd			-12	dBm
LOS Hysteresis	Pd-Pa	0.5			dB