Elevator Etching Color Stainless Steel Sheet Coil 0.6mm 0.7mm 0.8mm 1.0mm
304 0.6mm 0.7mm 0.8mm 1.0mm elevator etching color plates stainless steel 304 sheet coil
Stainless steels are primarily used when corrosion or oxidation is a problem. The function that they perform cannot be duplicated by other materials for their cost. Over 50 years ago, it was discovered that a minimum of 12% chromium would impart corrosion and oxidation resistance to steel. Hence the definition “Stainless Steels”, are those ferrous alloys that contain a minimum of 12% chromium for corrosion resistance. This development was the start of a family of alloys which has enabled the advancement and growth of chemical processing and power generating systems upon which our technological society is based.
| Product type | Etched Colored Stainless Steel Sheet/Plate/Coil |
| Grade | 200/300/400Series--SS201,304,316,430 |
| Color | Golden, Black , Sapphire Blue, Brown, Rose gold, Bronze, Purple, Gray, Silver, Champagne, Violet,etc. |
| Thickness | 0.3-3.0mm |
| Width range | 600mm - 1500mm |
| Length | 2000/2438/3048mm customization |
| Regular size | 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or customization |
| Surface finish | 2b, BA, No.4, 8k, hairline, embossed, etched, vibration, pvd color coated, titanium, sand blasted, anti-fingerprint |
| Origin | POSCO,JISCO,TISCO,LISCO,BAO STEEL etc. |
| Payment terms | 30%TT for deposit, 70% balance before shipment or LC at sight |
| Lead time | 7 to 25 working days after the receipt of 30% deposit |
Stainless Steel Mirror Sheets/Plates
Mirror finish is created by mechanically treating the surface with a series of progressively finer abrasives. Alternatively a special rolling procedure is used which can simulate the appearance of mechanical abrasion. For this stage, it is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. The final process involves buffing the surface for 5-10 minutes to create a mirror-like, highly reflective finish.
Etched Stainless Steel Sheet
Etched patterns are created by selectively applying a protective acid resistant film to a highly polished surface and acid etching the unprotected areas. The film can be applied by hand painting,silk screening or other methods. Incorrect etching can undercut the protective film and result in rough edges. The etching removes a thin layer of stainless steel,changes the color to a dull silver gray,and roughens the surface. The etched pattern can be left as is or made more reflective. The finish is often electro polished after completion. Very elaborate patterns can be achieved. Both custom and stock patterns are available.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.