Pneumatic Damper Air Suspension Struts Tesla Shock Absorbers Fit Model S 3 600640300A
Pneumatic Damper Air Suspension Struts Tesla Shock Absorber Fit Model S 3 600640300A
Air Ride Suspension Struts applicable TESLA S Front & Rear 6006351-00-C
Quick detail
| Description | Brand New Air suspension Tesla model 3 2012-2015 front 6006351-00-C 600640300A |
| Model | Air suspension Tesla model 3 2012-2015 front 6006351-00-C 600640300A |
| OEM |
6006351-00-C 6006352-00-C 6006351-04-A 600640300 600640300A 6006352-00-C 600640300A 600635100C |
| Condition | Brand New |
| Fitting Position | Front Left and Right |
| Material | Rubber+Steel Aluminum |
| Application | Air suspension Tesla model 3 2011-2015 front 6006351-00-C 600640300A |
| Warranty | 12 months |
| Delivery | 3-15 days after receiving payment |
| Gross Weight | 7KG |
Specification
1. Fit for Tesla Model S 2011-2015, for Tesla Model S, 60D,70,75,75D,85,85D,90D,P100D,S,Sedan
2. Position:Front Left or Right
3. OEM: 6006351-00-C, 600640300 , 600640300A, 6006403-00-A , 6006351-04-A, 6006351-00-D, F4-BE5-JO91-WO, TESS-R310-ADFU , AS-7378
4. Package Include:1 PC Air Suspension Shock
5. Brand Guarantee:12 months warranty and feel free contact us with any problem
Features
What is a strut and when does it need replacing?
Struts are an important part of the suspension system in many vehicles. It serves three main roles:
Supports the car or truck
Absorbs impact from potholes, bumps and other irregularities in the road
Helps vehicle wheels turn when driver turns the steering wheel
A complete strut assembly includes both a spring and a shock absorber.
Struts are cylinder-shaped pistons, with a coiled spring wrapped around a shaft, and filled with hydraulic oil. This heavy-duty coil spring supports the weight of the vehicle and absorbs large bumps.
The strut absorbs most of the weight of the vehicle’s up and down motion when it goes over road bumps, while the shock absorbers dampen the resulting vibrations to stop the vehicle from continuing to bounce up and down after the vehicle clears the road obstructions.
The strut’s spring is very strong, and this compressed spring can be very dangerous if not handled properly. To service the struts safely, Arch Auto Parts uses a spring compressor to compress the spring safely, remove the worn strut, and install the new strut in its place. The spring is then carefully allowed to return to its previous state, and the new strut is ready to support your car or truck and absorb impact from potholes and road bumps again.
In this guide, we take a look at the Mercedes Adaptive Damping System or ADS. What it is and how to tell if your Mercedes-Benz has it.
Many Mercedes-Benz vehicles are equipped with Airmatic suspension, including E, S, ML, GL, R, and SL classes.
There is a lot of confusion on the Mercedes Adaptive Damping System or ADS.
Sometimes Mercedes ADS is even confused with Active Body Control (ABC) hydraulic suspension.
A few Mercedes vehicles are equipped with (ADS) in addition to Airmatic. Think of ADS as an add-on to the Airmatic. In fact, even though ML, GL, R class sold in the US have air suspension as standard, not all of them have ADS.
I. Advantages and disadvantages: Air damper is the highest vibration isolator with the highest vibration isolation efficiency, better than the spring and rubber, the advantage is that the vibration isolation efficiency is very high, the size is easy to install, the disadvantage is that it takes half a year to check once If the air pressure is small, it will be qi.
Second, the air-shaped damper noun explanation: the air spring shock absorber consisting of an aerial element consisting of three parts of the air chamber, a rubber elastic separator, and a support plate, is an internal inflatable sealed container, which is used to varying the vibration-resistant. . The air spring shock absorber has a lower inherent frequency (2.6 ~ 5.3 Hz), a higher damping ratio (0.06 ~ 0.08), so a higher vibration isolation efficiency air spring shock absorption load change, system inherent frequency It is generally unchanged, so there is a variable stiffness characteristic, so it does not have to consider the center of gravity when the vibration isolating device is designed. The carrying capacity is large and the weight is lighter.
FAQ
|
1. Are You Manufacturer Or Trading Company?
|
|||
|
Re: We Are Both Specialize In Auto Parts ( Air Suspension) Manufacturer & Tradeing Company.
|
|||
|
2. What's The MOQ?
|
|||
|
Re: The MOQ With Our Standard Products Is 1 Piece.
|
|||
|
3. What's Your Mainly Products?
|
|||
|
Re: We Supply Air Suspension Spring, Shock Absorber, Pressure Shocks, Air Pump etc.
|
|||
|
4. What's Your Policy On Warranty?
|
|||
|
Re: We Provide 12 Months For New Suspension Parts Products For Our Customers.
|
|||
|
5. Where Is Your Company?
|
|||
|
Re: Our Trade Office In Baiyun District ,Guangzhou; Our Factory Located At Shunde District Foshan City.
We Warmly Welcome You To Visit With Us Anytime, More Details & Info Please Contact Us
|
|||
|
6. What Are Your Payment Methods?
|
|||
|
Re: We Accept T/T, Paypal, Western Union, Money Gram, Alipay. Due To Difference Payment In Difference Countries Or Regions.
|
|||
|
7. What's Your Packing Way?
|
|||
|
Re: Neutral Packing, Standard Packing, Accept Customers' Special Required.
|
|||
|
8. How Do You Usually Ship The Goods And When?
|
|||
|
Re: Normally, We Will Ship The Goods In 3-7 Days After Payment Verified And Goods Confirmed, And Ship The Goods Via The (HuangPu) Ports In GuangZhou.
|
|||
|
9. If You Offer The Free Sample?
|
|||
|
Re: We Accept MOQ 1 Piece Order, But Do Not Offer The Free Sample To Our Customers.
|
Note:
1. 12 month warranty
2. 100% quality testing before shipping.We will provide you excellent customer service and 100% satisfaction warranty.
3. Please note that we do not be responsible for any customers fee which is charged by your country.
When you take the order ,it means the buyer has agreed clearly all of our terms.If not ,please contact us before order.
Instruction is not included. Professional installation is recommended. We are not responsible for the warranty because of Artificial damage and Improper installation. Please provide photos or videos to apply for warranty. If you are not sure whether our parts fit your car please provide the VIN number of your car,we will confirm for you.
OEM/ODM Service:
- If you want to show your own brand LOGO on the goods such as cable, package bag, label or any where. Our OEM and ODM service is always ready to do it. Please contact with our sales team to get best support.
Packing:
- According to Stardard Export Packing.
- Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- Internatioal air: CA, AA, EA, etc
- By sea
- Standard export sea port: Huangpu, Hongkong, Shunde
- Standard export airport: Shenzhen, Hongkong, Guangzhou
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.