Bidirectional CNC Stirrup Bender Machine For Roads And Bridges
Overview
Gute automatic CNC bending machineCNC rebar stirrup bending machine can be used for one-time forming of stirrups, hooks and special-shaped parts. It can automatically complete the functions of straightening, sizing, bending, cutting and counting of steel bars and round steel. The equipment adopts numerical control system, and controls the servo system through touch screen and PLC. The finished stirrup has high processing precision, stable and reliable quality, and strong graphic storage capacity. It is easy to operate and easy to set up. It can save a lot of labor and waste. Improving processing efficiency is an indispensable part of modern building construction, and it is also an intelligent device that meets international standards.
Scope of application
Mainly used in the construction of housing construction, highways, roads and bridges, subways and other projects
Device parameters
| Single wire bending diameter | 5–13mm |
| Double wire bending diameter | 5–10mm |
| Processing material | Steel coil |
| Maximum towing speed | 75-100 m/min |
| Maximum towing speed | 1050°/sec |
| Rib straightness error | 0.02/m |
| Total power | 48KW |
| Power consumption | 7KW/H |
| Bending direction | Bi-direction |
| Stirrup length accuracy | ±1mm |
| Rib length accuracy | ±5mm |
| Angle accuracy | ±1° |
| Maximum bending angle | ±180° |
| Maximum bending angle | 1000mm |
| Shortest stirrup side | 90mm |
| Working temperature | -5~40 ℃ |
| Traction control method | Servo |
| Bend control method | Servo |
| Loopback control method | Servo |
| Total Weight | 3.7T |
Equipment advantages
1, The raw material pre-straightening mechanism is composed of 14 straightening wheels. The spacing of each straightening wheel can be adjusted and controlled by bolts. The straightening wheel has double grooves for double wire straightening. At the same time, the straightening wheel is made of forged alloy tool steel, which is wear-resistant and impact-resistant.
2, Equipped with 19KW high-power servo motor to ensure smooth operation of traction. The square head transition connection is adopted, and the strength is 12 times that of the traditional flat key connection. The traction pulley is made of forged alloy tool steel, which is wear-resistant and impact-resistant.
3, The split-type thick blade design is fixed on the blade seat with bolts, and the thickness reaches 40mm. The replacement is quick and the maintenance is convenient, which greatly reduces the maintenance cost of the equipment.
4, The touch screen console can store hundreds of graphics and is easy to operate.
Our factory
Our service
Certification
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.