11m Horizontal Automatic Rebar Bending Machine Double Head
40mm Diameter Rebar Double Head Horizontal Type Automatic Rebar Bending Machine
32m Double Head Cnc Autmatic Rebar Bending Machine
Overview
The vertical CNC steel bar bending center can be used in the construction of high-speed, road and bridge, housing construction, subway and other projects. The raw material is 10-32mm bar. Can process a variety of graphics, using PLC control.
Device parameters
| rated power | 28.5KW | |||||||||
| Air source working pressure | 0.8MPa | |||||||||
| Maximum bending angle | -120°至180° | |||||||||
| Maximum bending length | 10m | |||||||||
| Minimum curved edge spacing | 950mm | |||||||||
| Moving speed of machine head | 0.5-0.9m/sec | |||||||||
| Fastest bending speed | 72°/sec | |||||||||
| total weight | 6.5t | |||||||||
| L*W*H | 12.8m×3m×1.1m | |||||||||
| Diameter | 10 | 12 | 14 | 16 | 20 | 22 | 25 | 32 | 40 | |
| Quantity | 7 | 6 | 5 | 5 | 3 | 2 | 2 | 1 | 1 | ±≤90° |
| Movement Control | Servo | |||||||||
| Bending Control | Servo | |||||||||
| Power source | pneumatic | |||||||||
Equipment advantages
The steel bar support adopts the crank connecting rod mechanism, and the steel bar support .At the same time, the steel bar is sent to the top of the bending machine head, which is convenient for the operator to discharge and reduce the labor intensity of the workers. In addition, it is driven by a motor reducer. All the supporting rods have the same action and the transmission is stable and reliable.
Both the left and right bending heads and the holder are equipped with automatic steel unloading hooks to process longer steel
When reinforcing steel bars, the automatic unloading of steel bars can still be realized.
Case
Our factory
Our service
Certification
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.