China 1×N Optical Switch for Testing of Fiber, Optical Component, More Than 128 Channels.1x16 1x32 1x64 1x128 for sale

1×N Optical Switch for Testing of Fiber, Optical Component, More Than 128 Channels.1x16 1x32 1x64 1x128

Price Negotiable

Price: negotiate

MOQ: 50

Delivery Time: 7-10 day

Brand: GAPHO

Product Description

1xN High Reliability Optical Switches, 1x4 1x8 1x16 1x32 1x64 ,Ring Network ·Remote Monitoring in Optical Network

1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.

Features

·More Than 128 Channels

·Low Loss and High Reliability

·Parallel Interface (TTL)

·Modularized Design

·Epoxy-free on Optical Path

Applications

·Ring Network

·Remote Monitoring in Optical Network

·Testing of Fiber, Optical Component

Specifications

Parameters	Unit	GP-OSW1×N
Insertion Loss	dB	1 < N ≤ 32	32 < N ≤ 64		64 < N ≤ 128
		Type: 0.8 Max: 1.0	Type: 0.8 Max: 1.2		Type: 0.8 Max: 1.3
Wavelength Range	nm	850±40 / 1300±40,1550 MM		1260 ~ 1650 SM
Test Wavelength	nm	850 / 1300,1550 MM		1310 / 1550 SM
Return Loss	dB	MM ≥ 30 SM ≥ 50
Crosstalk	dB	≥ 70
PDL	dB	≤ 0.05
WDL	dB	≤ 0.25
TDL	dB	≤ 0.25
ER (PM swtich)	dB	≥ 16 (PoIarization Maintaining switch)
Repeatability	dB	≤ ±0.05
Durability	Cycles	≥ 10 Million
Switching Time	ms	≤ 10(Sequence switch time of adjacent channel)
Optical Power	mW	≤500
Operating Temperature	℃	-5 ~ +70
Storage Temperature	℃	-40 ~ +85
Relative Humidity	%	5 ~ 95
Dimension	mm	135×40×32 (N≤12)	135×60×32(N≤18)		135×60×38 (N≤32)
		150×80×67 (N≤64)	165×100×100 (N≤98)		185×130×130 (N≤128)

Pin Configurations

DB-9 male connector (max.1×16)

Pin No.	Signal Name	I / O	Description
1	D0	Input	TTL, Channel selection bit 0
2	D1	Input	TTL, Channel selection bit 1
3	D2	Input	TTL, Channel selection bit 2
4	D3	Input	TTL, Channel selection bit 3
5	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
6	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
7	ERROR	Output	TTL, Error (High=Error, Low=No error)
8	GND	Input	Ground
9	+5VDC	Input	5.0±5% VDC Power Supply (max 800mA)

DB-15 male connector (max.1×32)

Pin No.	Signal Name	I / O	Description
2	D0	Input	TTL, Channel selection bit 0
3	D1	Input	TTL, Channel selection bit 1
4	D2	Input	TTL, Channel selection bit 2
5	D3	Input	TTL, Channel selection bit 3
6	D4	Input	TTL, Channel selection bit 4
11	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
8	ERROR	Output	TTL, Error (High=Error, Low=No error)
1, 9	GND	Input	Ground
15	+5VDC	Input	5.0±5% VDC Digital power supply (max 50mA)
12	VM	Input	5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA)
14	ISP	Input	TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground.
10, 13	NA

DB-15 male connector (max.1×64)

Pin No.	Signal Name	I / O	Description
2	D0	Input	TTL, Channel selection bit 0
3	D1	Input	TTL, Channel selection bit 1
4	D2	Input	TTL, Channel selection bit 2
5	D3	Input	TTL, Channel selection bit 3
6	D4	Input	TTL, Channel selection bit 4
10	D5	Input	TTL, Channel selection bit 5
11	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
8	ERROR	Output	TTL, Error (High=Error, Low=No error)
1, 9	GND	Input	Ground
15	+5VDC	Input	5.0±5% VDC Digital power supply (max 50mA)
12	VM	Input	5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA)
14	ISP	Input	TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground.
13	NA

DB-15 male connector (max.1×128)

Pin No.	Signal Name	I / O	Description
2	D0	Input	TTL, Channel selection bit 0
3	D1	Input	TTL, Channel selection bit 1
4	D2	Input	TTL, Channel selection bit 2
5	D3	Input	TTL, Channel selection bit 3
6	D4	Input	TTL, Channel selection bit 4
10	D5	Input	TTL, Channel selection bit 5
13	D6	Input	TTL, Channel selection bit 6
11	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
8	ERROR	Output	TTL, Error (High=Error, Low=No error)
1, 9	GND	Input	Ground
15	+5VDC	Input	5.0±5% VDC Digital power supply (max 50mA)
12	VM	Input	5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA)
14	ISP	Input	TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground.

Channel Selection Table

Max Channel	Input								Active Channel
Max Channel	/RESET	D6	D5	D4	D3	D2	D1	D0	Active Channel
N=16	0	x	x	x	x	x	x	x	0 reset
	1	x	x	x	0	0	0	0	COM → 1
		x	x	x	0	0	0	1	COM → 2
		x	x	x	0	0	1	0	COM → 3
		x	x	x	…	…	…	…	…
		x	x	x	1	1	1	1	COM → 16

N=128	0	x	x	x	x	x	x	x	0 reset
	1	0	0	0	0	0	0	0	COM → 1
		0	0	0	0	0	0	1	COM → 2
		0	0	0	0	0	1	0	COM → 3
		…	…	…	…	…	…	…	…
		1	1	1	1	1	1	1	COM → 128

Optical Route

Timing Diagram

Dimension(DBx male head or female head is defined as the actual mark of the element)

Ø 01: 135×40×32-DB9 (N≤12, DB-9 male)

Ø 02: 135×60×32-DB9 (N≤16, DB-9 male)
Ø 03: 135×60×32-DB15 (N≤18, DB-15 male)

Ø 04: 135×60×38-DB15 (N≤32, DB-15 male)

Ø 05: 150×80×67-DB15 (N≤64, DB-15 male)

Ø 06: 185×130×130-DB15 (N≤128, DB-15 male)

Ordering Information:

General switch : GP-OSW1×N-AB-CD-EF

Polarization maintaining switch : GP-OSW1xN-PM-AB-CD-EF

Channel

Fiber Type

Test Wavelength

Tube Type

Fiber Length

(Include connector)

Connector

Dimension

1 ~ 128

SM: SM, 9/125

M5: MM, 50/125

M6: MM, 62.5/125

X: Others

85: 850nm

13: 1310nm

15: 1550nm

1315:1310/1550nm

X:Others

9: 900um

2: 2.0mm

3: 3.0mm

X: Others

05: 0.5m±5cm

10: 1.0m±5cm

15: 1.5m±5cm

X: Others

OO:None

FP: FC/PC

FA: FC/APC

SP: SC/PC

SA: SC/APC

STP: ST/PC

STA: ST/APC

LP: LC/PC

LA: LC/APC

X: Others

01: 135×40×32-DB9

02: 135×60×32-DB9

03: 135×60×32-DB15

04: 135×60×38-DB15

05: 150×80×67-DB15

06: 185×130×130-DB15

X: Others

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Shenzhen Jiangfan Communication Equipment Co., Ltd.

Location Floor 3, Building B, No. 24, Third Industrial Zone, Langxiii, Songgang Town, Baoan District, Shenzhen, Guangdong, China

Contact Person wang

Request A Quote

Email Address *

Please check your email address.

Phone / WhatsApp

Your Message *

Your message must be at least 20 characters.

1×N Optical Switch for Testing of Fiber, Optical Component, More Than 128 Channels.1x16 1x32 1x64 1x128

MPO To MPO 8 Core Fiber Optic Cable Fiber Optic Jumper OM3 Green PVC

FC Fiber Optic Cable Connector Single Multimode Fiber Optic Connectors

250μ Single Mode Optic PLC Splitter Fiber Optic Splitter 1x4 Without Connector

MPO-MTP optical fiber distribution frame 48 core 96 core distribution frame 1U LC optical fiber module box

MPO / MTP 6-core 8-core 12 core optical fiber fan out kit solution

24 core 6-port LC optical fiber adapter panel 12 core SC can be shared

Single Mode LC Fiber Patch Panel 24 Port 6 Channels With Four Channels

FTTH FTTB MEMS Optical Switch With High Latching Intrinsic ESD Tolerance

ROHS Standard Fiber Optic Fan Out Kit Patch Cord Splitter 2 Core

Gapho manufacturer direct selling 1 * 2 optical cable fan out kit 2-core 3.0mm

GAPHO Optic Node WDM FTTH Optical Receiver WS-OR19 Series For CATV

Custom 12 core 24 core optical fiber fan out kit 3mm cable diameter cable protection

Get in Touch

Request A Quote