300-400kg/H Peanut Small Feed Pellet Machine For Breeding

Manufacturer of small feed pellet machine for breeding

Introduction:

The diameter is 2mm-8mmThis kind of animal feed pellet mill is designed to make pellet foranimal/poultry food. The raw materials can be the corn, grain, soybean, peanut, wheat, straw powder, and others. Put the mixed materials into the hopper, don’t need to add the water and heating.

Raw material:

By purchasing our household Small feed pellet machine, you can receive a variety of poultry animal feed formulas for free, such as corn, straw, grass and other grains and grasses can be processed into feed pellets.

Technical parameter:

Features of small feed pellet machine:

1. Simple structure, wide application, small floor space, low noise level
2. Only need to add a little amount of liquid or no need at all to make powdery feed and grass meal into granules.Thus moisture content of granule feed is basically the same moisture content before granulation, so as to be easily stored.
3. Feed of chicken, duck, fish etc guarantees higher economic benefit than mixing powdery feed.
4. Feed granules made from dry materials are with higher hardness level, smooth surface, cooked inside and will make nutrition easily digested.
5. The formation process of granules will make pancreatic enzyme boycott factor in grains and beans denaturized, to reduce bad effects on digestion and kill all kinds of parasite eggs and other pathogenic microorganisms and reduce all kinds of parasitic and digestive system diseases.

Precautions for household Small feed pellet machine:

1. Be sure to add gear oil before the machine is used for the first time to prevent idling and abrasion of the transmission parts.

2. Before turning on the domestic Small feed pellet machine, you need to add less material before turning it on. When turning off the machine, leave a little feed in the machine to prevent the press roller of the machine from contacting with the grinding disc from idling.

3. During granulation, it is strictly forbidden that the pressure roller and the grinding disc contact idling, and the continuous feeding can not be too fast, not too slow, and not interrupted.

4. When there is no granulation and no discharge, the grinding disc should be removed, the blocked feed should be cleaned hole by hole, and some fiber feed can be added appropriately to restart the pelletizing.

5. If the machine is stuck when it is working, it should be shut down immediately, and the distance between the rollers and grinding discs should be adjusted before restarting.