Womala Front Lower Control Arm Rubber Bushings C2D4723 for Jaguar XJ X351 2009-
Product Overview
The Front Lower Control Arm Bushing C2D4723 is a genuine OE-grade suspension component engineered for the for Jaguar XJ (X351) from 2010 to 2019. This front bushing fits the forward position of the front lower curved wishbone, providing vibration isolation and maintaining correct suspension geometry.
C2D4723 is the primary part number. This bushing is also referenced under C2D6343 for certain applications.
Key Features
-
Front lower control arm bushing – fits the forward position of the curved front lower wishbone
-
Universal left/right fitment – one part number covers both left and right front lower positions
-
OE-grade quality – available as Genuine Jaguar and quality aftermarket alternatives (Borg & Beck, First Line)
-
Direct-fit replacement – press-in installation; matches factory control arm dimensions
OE Cross-Reference
| Primary OE | Aftermarket Equivalents |
|---|---|
| C2D4723 | Borg & Beck BSK7922 · First Line FSK7922 |
???? Note: C2D4723 is confirmed as the OEM reference for Borg & Beck BSK7922 and First Line FSK7922.
Technical Specifications
| Parameter | Detail |
|---|---|
| Part Type | Front Lower Control Arm Bushing |
| Position | Front Lower – Forward Position (Left & Right) |
| Inner Diameter | 14.3 mm |
| Outer Diameter | 100.1 mm |
| Length | 70 mm |
| Weight | Approx. 348 g |
| Condition | Brand New, OE-Grade |
Vehicle Fitment
| Make | Model | Chassis | Position | Years | Drivetrain |
|---|---|---|---|---|---|
| for Jaguar | XJ / XJR | X351 | Front Lower | 2010 – 2019 | RWD Only |
| for Jaguar | XJR575 | X351 | Front Lower | 2018 – 2019 | RWD Only |
Engine compatibility (verify with VIN):
-
2.0L Ti4 Petrol (204PT)
-
3.0L V6 Petrol / Diesel (AJ126 / AJV6D / 306DT)
-
5.0L V8 Petrol (NA & Supercharged)
⚠️ Important: This bushing is for RWD (rear-wheel drive) models only – not for AWD variants. Fitment varies by model year and production date.
Signs of Failure
-
Clunking or rattling noise – from front suspension over bumps or during hard braking
-
Steering wheel shimmy – vibration felt through the steering wheel
-
Poor handling or loose steering – reduced steering precision
-
Uneven tyre wear – abnormal wear patterns on front tyres
???? Worn bushings allow excessive movement in the suspension joints, causing clunking noises, poor handling, and uneven tyre wear. If one side is worn, inspect the opposite side as well.
Critical – Verify Your VIN Before Ordering
Suspension bushings are VIN- and drivetrain-specific. This part is for RWD models only. Provide your VIN – our team confirms exact compatibility before dispatch. We cannot accept returns for misordered parts without VIN verification.
???? Installation Tip: Professional installation recommended – a hydraulic press is required to remove and install the bushing in the control arm. Torque all fasteners to manufacturer specifications and perform a wheel alignment after installation.
Why Choose Us
|
Advantage |
Detail |
|---|---|
|
Inventory |
10,000+ SKU in stock |
|
Quality |
OE-grade, fully tested |
|
Warranty |
18-month against manufacturing defects |
|
Shipping |
Global via DHL / UPS / FedEx |
|
Flexibility |
Sample orders welcome, low MOQ |
Contact us for bulk orders or VIN‑checked quotes.
Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.
Frequently Asked Questions
A: Signs of a failing bumper bracket include visible damage or deformation, misaligned bumper panels, unusual noises from the front end, or if the bumper appears loose or sagging on one side.
A: For optimal results, we recommend professional installation. Key considerations include ensuring proper alignment of all mounting points, checking for additional damaged components, and verifying all fasteners are properly torqued to specification.
- Extensive Industry Experience: 13 years specializing in Auto Parts auto parts with precise product matching and technical solutions.
- Quality Assurance: 10-stage quality inspection process including durability testing, surface roughness analysis, and dimensional verification.
- Manufacturing Excellence: 15,000㎡ production base with 10,000+ SKUs in inventory for fast order fulfillment.
- Strategic Partnerships: Collaborations with 50+ factories including suppliers to international brands like Womala and Hella.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.