Tungsten Carbide 12% Cobalt Sintered And Crushed Powders For Thermal Spray
WC-12Co Tungsten Carbide – 12 % Cobalt Sintered and Crushed Powders for Thermal Spray
Chemicals Composition:
| Grade | T.C | Co | Fe | Manufacture |
| BD-PS1303 | ≤5.25 | 11.5-13.0 | ≤1.5 | Sintered & Crushed |
| Particle Size Micron | Apparent Density g/cm3 | Hall Flow S/50g | Appearance |
| 45-11 | ≥4.0 | ≤25.0 | Angular/Blocky |
| 45-15 |
SEM of WC-12Co sintered and crushed
Typical Properties and Application For BD-PS1303:
Tungsten Carbide – 12 % Cobalt Sintered and Crushed Powders are most commonly applied using HVOF or atmospheric plasma spray to produce very dense, well-bonded coatings.
These coatings provide excellent resistance against most forms of abrasive wear at lower service temperatures,.
Typical applications include:
- Conveyor screws
- Compressor stators
- Compressor air seals
- Fan blade midspan supports
- Duct segments
- Impeller shafts
- Aircraft flap tracks
- Cam followers
- Exhaust fans
- Expansion joints
Boda HVOF Thermal Spray Powder Products ranges:
| Product | Particle Size | Equal to | Main Performance | Spray Process | Applications |
| WC-10Co-4Cr | 45-15um | Woka 3651 3652 3653 3654 3655 3665 |
Corrosive wear resistance |
HVOF,HVAF, Atmospheric Plasma |
Landing gears |
| 45-11um | Paper manufactureing rolls,Corrugating rollers | ||||
| 38-10um | Ball,gate and dump valves | ||||
| 25-5um | Hydroturbine buckets | ||||
| WC-12Co | 53-20um | Woka 3101, Woka 3102, Woka 3103, Woka 3105, |
Wear resistance |
HVOF,HVAF, Atmospheric Plasma |
Steel rolls |
| 45-15um | Corrugating rollers | ||||
| 38-10um | Sucker rod couplings | ||||
| 25-5um | Conveyor screws | ||||
| WC-17Co | 53-20um | Woka 3201 3202 3203 3205 3208 |
Ductile Wear resistance |
HVOF,HVAF, Atmospheric Plasma |
Landing gears |
| 45-15um | Pump seals | ||||
| 38-10um | Exhaust fans | ||||
| 25-5um | Crushing rollers | ||||
| WC-10Ni | 53-20um | Woka 3301 3302 3303 3304 3305 |
excellent corrosion resistance, abrasion and sliding wear |
HVOF,Plasma spray | ball valves,gate valves,oil field equipment |
| 45-15um | |||||
| 38-10um | radio-active environments | ||||
| WC-12Ni | 45-20um | Woka 3402 3403 3404 3406 |
excellent corrosion resistance, abrasion and sliding wear |
HVOF,Plasma spray | Steeling making |
| 45-15um | Centrifugal Casting | ||||
| 38-10um | Plastic centrifuge | ||||
| WC-15Ni | 53-20um | N/M |
excellent corrosion resistance, abrasion and sliding wear |
HVOF,Plasma spray | Steeling making |
| 45-15um | Centrifugal Casting | ||||
| 38-10um | Plastic centrifuge | ||||
| WC-20Cr3C-7Ni | 53-20um | Woka 3701 3702 3702-1 3703 | excellent oxidation resistance , good erosion,abrasion wear resistance; | HVOF,Plasma spray | iron&steel industry, paper making,pump and valve |
| 45-15um | field of Screw drilling tools | ||||
| 38-10um | chemical equipment in petroleum machinery | ||||
| 25NiCr-Cr3C2 | 53-20um | Woka 7201 7202 7203 7204 7205 7210 |
Excellent sliding,abrasion, erosion/Corrosion,wear resistance, Good cavitation,corrosion resistance. |
HVOF,HVAF, Atmospheric Plasma |
Gas turbine |
| 45-15um | aircraft engine,valve rod,powder generation boiler | ||||
| 38-10um | metallurgical furnace roller and hydraulic valve etc | ||||
| 20NiCr-Cr3C2 | 53-20um | Woka 7101 7102 7103 7104 7105 |
Excellent sliding,abrasion, erosion/Corrisionwear resistance, Good cavitation,corrosion resistance. |
HVOF,HVAF, Atmospheric Plasma |
Gas turbine |
| 45-15um | aircraft engine,valve rod,powder generation boiler | ||||
| 38-10um | metallurgical furnace roller and hydraulic valve etc |
Company Introduction:
Zhuzhou Jiangwu Boda Hard-facing Materials Co., Ltd. was founded in 2007,
it’s located in Jiulong Technical and Economic Development Zone, Yanling,Hunan Province.
Zhuzhou Jiangwu Boda Hard-facing Materials Co., Ltd. is a self-export-oriented production and marketing enterprises,
It’s has been committed to hard-surface materials manufacturing and sales since 1993,
Which also has a broad and stable market at home and abroad.
Zhuzhou Jiangwu Boda Hard-facing Materials Co., Ltd. set thermal spraying (spray welding) powder, hard surface materials, refractory metal carbide and other new materials products R & D, production and sales in one,.
with professional R & D, production, sales and management team and quality assurance system, access to ISO9001:2015 Quality Management system certification, Product quality is stable, sold at home and abroad, widely used in oil extraction, aerospace, mining mining, mechanical tools and other fields.
"Boda" brand has won the trust and praise of many customers worldwide with its "excellent quality, brand complete, thoughtful service" image,
We will continue to uphold the "customer first, integrity-based, win-win cooperation" concept, work together with friends from all walks of life at home and abroad to create a better future!
Advantages:
1.100% factory manufacturing and factory direct sales.
2. Competitive price and quality guarantee.
3.Trial order and customized testing sample are welcomed.
4.Independent research and development ability and high efficient production capacity.
5.We have more than 10 years of experience in producing Thermal spray powder,tungsten carbide materials,PTA,Metal Caride.
6.We have through the ISO9001 quality management system certification.
7.We have a professional team and engineer, can solve all the problems you meet .
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.