ISO 316L Stainless Steel Pipe For Water Supply In Standard And Non Standard Size
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
7-15 Work days
Brand:
SYL
Product Description
316L Stainless Steel Seamless Pipe Tube In Standard And Non - Standard Size
Tolerances
Hot-Finished Round Tubing Permissible Variations:
These tolerances apply to cut lengths up to an including 24 Ft. (7.3M). For lengths over 24Ft. an additional over tolerance of 1/8in (3.1mm) for each 10ft. (3m) or fraction thereof shall be permissible up to a maximum tolerance of 1/2 in. (12.7mm)
| Specified Dimension,Outside Diameter | Ratio of Wall Thickness to Outside Diameter | Outside Diameter | Up To 0.109 | 0.109 to 0.172 | Over 0.172 to 0.203 | Over 0.203 | Permissible Variations In Cut Length | ||||||
| Over | Under | Over | Under | Over | Under | Over | Under | Over | Under | Over | Under | ||
| up to 3" | All Thickness | 0.023 | 0.023 | 16.5 | 16.5 | 15 | 15 | 14 | 14 | 12.5 | 12.5 | 3/16 | 0 |
| 3" to > 5.5" | All Thickness | 0.031 | 0.031 | 16.5 | 16.5 | 15 | 15 | 14 | 14 | 12.5 | 12.5 | 3/16 | 0 |
| 5.5" to > 8" | All Thickness | 0.047 | 0.047 | 14 | 14 | 12.5 | 12.5 | 3/16 | 0 | ||||
| 8" to > 10.75" | 5% and Over | 0.047 | 0.047 | 12.5 | 12.5 | 3/16 | 0 | ||||||
| 10.75" to > 12.75" | Under 5% | 0.063 | 0.063 | 12.5 | 12.5 | 3/16 | 0 | ||||||
| Specified Dimension, Outside Diameter |
Ratio of Wall Thickness to Outside Diameter |
Outside Diameter | Up To 0.109 | 0.109 to 0.172 | Over 0.172 to 0.203 | Over 0.203 | Permissible Variations In Cut Length | ||||||
| Less than 0.150 In. | 10 | 10 | 3/16 | 0 | ||
| 5 1/2 to 8 Excl. | 0.03 | Less than 0.240 In. | 10 | 10 | 3/16 | 0 |
| 8 to 8 5/8 Excl | 0.045 | Less than 0.300 In. | 10 | 10 | 3/16 | 0 |
| 8 5/8 to 12 3/4 | 0.062 | Less than 0.350 In. | 10 | 10 | 3/16 | 0 |
| Outside Diameter, In. | Outside Diameter Tolerance, In. Over and Under |
Ovality Double Outside Diameter Tolerance when wall is: |
Wall Thickness in % | Permissible Variations in Cut Length, in. | ||
Cold-Finished Round Tubing Permissible Variations:
- Tolerances of tubes produced by the rod or bar mandrel process and which have an inside diameter under 1/2 in (12.7mm) (or an inside diameter under 5/8 in. When the wall thickness is more then 20% of the outside diameter.) Are as shown in this table except that wall thickness tolerances are 10% over and under the specified wall thickness.
- For Ovality values, the tolerance for average outside diameter at any one cross section does not exceed the outside diameter tolerance value for the applicable outside diameter.
- Many tubes with wall thicknesses more then 25% of outside diameter or with wall thicknesses over 1 1/4 in. Or weighing more then 90lb/ft. are difficult to draw over a mandrel. Therefore the wall thickness can vary 12 1/2% over and under that specified.
- For those tubes with inside diameter under 1/2 in (or under 5/8 in when the wall thickness is more then 20% of the outside diameter) which are not commonly drawn over a mandrel, A is not applicable. Therefore the wall thickness can vary 15% over and under that specified, and the inside diameter is governed by both the outside diameter and wall thickness tolerances.
- These tolerances apply to cut lengths up to an including 24 ft. For lengths over 24ft, an additional over tolerance of 1/8 in. for each 10ft. or fraction thereof shall be permissible, up to a maximum tolerance of 1/2 in.
Please send the size details about the outer and inner size, other requirements please feel free to let us know.
More Product Introduction
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Jiangsu Shengyilu Metal Material Co., Ltd.
Location
No.69 Erquan Middle Road, Dongting Street, Xishan District, Wuxi City, Jiangsu Province (Lanting International Building 2703)
Contact Person
Lan