Fast Speed Natural CNC Straight Paper Straw Machines 100m/Min
Recycling Fast Speed Natural CNC Drinking Straight Paper Straw Machine
paper straw machine
The high-speed paper straw machine integrates paper feeding, gluing, winding and cutting into a whole, and is equipped with a CNC multi-knife cutting system. The machine is controlled by PLC, and the main machine is equipped with frequency conversion and speed adjustment. The cutting part adopts the servo multi-cutter cutting system, which can synchronously follow the cutting of motor, with higher accuracy and time-saving efficiency. The body and main accessories are made of stainless steel to ensure the product's health and environmental protection.
PLC Tough Screen Multi Knives 8 Cutting Knifes Paper Straw Machine
1. Auto feeding function glue station, Glue station heating and recycle function.auto spray glue system
2. Simple appearance, all motors put inside, make it easy for cleaning.
3. Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation.
4. Networking:m product collection industrial 485 bus, industrial Ethernet bus, wireless wifi network, 4G network: decentralized control system.
5. Use intelligent equipment to monitor the running state of the machine in real time. In case of equipment failure, the manufacturer's engineer is automatically notified, and the engineer performs remote diagnosis and repair.
Technical Parameter of paper straw machine
| Surace Layer paper roll thickness 60gsm, middle & inner layer is 120gsm |
| If you need printed paper straw, only need to print the 60gsm thickness paper roll. |
| Paper Roll can be coated with Wax as per your requirements. |
| The proportion of paper roll and glue is 1000kgs paper roll: 150kgs glue. |
| One ton paper roll can do around 850000pcs of paper straw. |
| It is water base glue, must be food grade. |
| Technical Parameter | |
| Paper Layer | 3 layers |
| Inner Diameter | 3.5-12 mm |
| Min. Length | 90 mm |
| Wall Thickness | 0.5-1.5 |
| Speed | Up to 100 m/min. |
| Rewinding Noses | Two noses/single belt |
| Cutting method | Pneumatic blades |
| Gluing way | Single/Double face or no glue |
| Length fixation | Encoder |
| Way of shaft fixing | Pushing |
| Speed control | Servo |
| Operator | 1 person |
| Power input | 3*380V |
| Measurement & Weight | |
| Main machine size | 3511*1265*1800mm |
| Area space | 5000*5000mm |
| Wheel hub diameter | 215 mm |
| Wheel hub height | 125 mm |
| Min. tread | 320 mm |
| Max. tread | 500 mm |
| Weight | 1700kgs |
| Drive system | |
| Main power | 3.0 kw |
| Max. Rotate speed of wheel hub | 200 r/min |
| Output torque | 68 N.m |
| Drive of wheel hub | 2 wheel drive |
| Bearing | NSK |
| Control system | |
| PLC Controller | Delta |
| Man-machine interface | Weinview |
| Servo system | Delta |
| Actuator | Schneider |
| Signal components | Omron |
| Pneumatic component | Airtac |
| Synchronism control | Servo Flying Cutting system |
| Synchronous tracking cutting system | Electronic cam flying shear servo system |
| Outfit assembly | |
| Tube holder | Standard |
| Belt angle adjusting | Hand wheel adjustment |
| Belt tension adjusting | Hand wheel adjustment |
| Stop when paper break | Standard |
| Auto glue feeding | Diaphragm pump |
| Lubrication | Electric roller |
| Paper tension control | Constant tension control |
| Paper reel stand type | Automatic paper receiving |
| Belt | Film baseband |
| Enclosed component | |
| Mandrel | 3 pcs |
| Belt | 5 pcs |
| Tools | 1 set |
| Air compressor | optional |
| Automatic cutter adjustment device | optional |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.