Industrial DIN-Rail 1~16Ch Contact Closure over Fiber Converter
Industrial DIN-Rail 1~16Ch Contact Closure over Fiber Converter
Product Advantages
► Integrated circuit based independent intellectual property rights
► Supports 16Ch one-way or 8Ch two-way contact closure
► Support Dry Contact and Wet Contact
► Each channel contact closure with LED indication for switch on and off
► Contact input open and close automatically detects
► Contact closure keep stable in the boot or no access condition, it will not be chaotic action
► Contact closure interface Lightning reached IEC61000-4-5 (8 / 20μS) differential mode: 6KV, impedance (2Ω); common mode: 6KV, impedance (2Ω) standard
Overview
The Industrial DIN-Rail 1~16Ch Contact Closure over Fiber Converter provides transmission of a contact closure signal over one optical fiber. The system comprises of a transmitter (TX) and a receiver (RX), each enclosed in a compact DIN-rail and wall mountable housing. This contact closure system is designed to operate over an extreme temperature range, providing reliability in harsh environments.
Technical Indexes
|
Fiber |
|
|
Multi-mode Fiber:50/125um, 62.5/125um |
|
|
Maximum transmission distance |
2Km @ 62.5/ 125um multi mode |
|
fiber, attenuation (3dbm/km)Wave Length |
820nm |
|
Transmitting power |
-12dBm (Min) ~-9dBm (Max) |
|
Receiver sensitivity |
-28dBm (Min) |
|
Link budget |
16dBm |
|
FC/SC/ST/SFP (FC in default) |
|
|
Single-mode Fiber:8/125um, 9/125um |
|
|
Maximum transmission distance |
20Km |
|
Transmission distance |
20Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) |
|
Wave Length |
1310nm |
|
Transmitting power |
-9dBm (Min) ~-8dBm (Max) |
|
Receiver sensitivity |
-27dBm (Min) |
|
Link budget |
18dBm |
|
Fiber Type |
FC/SC/ST/SFP (FC in default) |
|
Contact Closure - Dry contact (in default) |
|
|
Response time |
<1ms |
|
Contact output signal |
30VDC/0.5A |
|
Maximum switching frequency |
50HZ |
|
Contact Closure - Pulse Value/Wet contact |
|
|
Interface type |
Optical MOS Relay Interface |
|
Response time |
<5ms |
|
Contact output signal |
0-VCC/0.12A (VCC is the power supply voltage of the unit) |
|
Maximum switching frequency |
50HZ |
|
Output Surge Protection |
TVS + TSS Protection |
|
Power Supply |
|
|
Redundant dual power input |
AC&DC9-48V power consumption <5W |
|
Overload protection |
Support |
|
Reverse protection |
Support |
|
Redundancy protection |
Support |
|
Access terminal |
4-pin 5.08mm pitch plug-in terminal |
|
|
|
|
Working temperature |
|
|
Working Humidity |
5%~95 % (no condensation) |
|
Storage temperature |
-40°C ~ 80°C |
|
Mechanical: |
|
|
Dimensions |
133mm×40mm×120mm (H×W×D) |
|
Casing |
|
|
Installation |
35mm DIN-Rail, Wall Mounting |
|
Weight |
685g |
Ordering Information
|
Model |
Description |
|
LNK-GY-K01 |
Industrial DIN-Rail 1Ch Contact Closure over Fiber Converter: 1Ch Contact Closure (Dry Contact in default), FC Optical port, Single Mode Dual Fiber, 20KM, DC9-48V/AC9-48V Power Input, Operating Temperature -40°C ~ 85°C, standalone, Support DIN-Rail mounting and Wall mounting installation |
|
LNK-GY-K02 |
Industrial DIN-Rail 2Ch Contact Closure over Fiber Converter: 2Ch Contact Closure (Dry Contact in default), FC Optical port, Single Mode Dual Fiber, 20KM, DC9-48V/AC9-48V Power Input, Operating Temperature -40°C ~ 85°C, standalone, Support DIN-Rail mounting and Wall mounting installation |
|
LNK-GY-K04 |
Industrial DIN-Rail 4Ch Contact Closure over Fiber Converter: 4Ch Contact Closure (Dry Contact in default), FC Optical port, Single Mode Dual Fiber, 20KM, DC9-48V/AC9-48V Power Input, Operating Temperature -40°C ~ 85°C, standalone, Support DIN-Rail mounting and Wall mounting installation |
|
LNK-GY-K08 |
Industrial DIN-Rail 8Ch Contact Closure over Fiber Converter: 8Ch Contact Closure (Dry Contact in default), FC Optical port, Single Mode Dual Fiber, 20KM, DC9-48V/AC9-48V Power Input, Operating Temperature -40°C ~ 85°C, standalone, Support DIN-Rail mounting and Wall mounting installation |
|
|
Industrial DIN-Rail 16Ch Contact Closure over Fiber Converter: 16Ch Contact Closure (Dry Contact in default), FC Optical port, Single Mode Dual Fiber, 20KM, DC9-48V/AC9-48V Power Input, Operating Temperature -40°C ~ 85°C, standalone, Support DIN-Rail mounting and Wall mounting installation |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.