40G QSFP+ To QSFP+ Active Optical Cable Length 100m Hot Pluggable OM2 Cable
Accessories 40G QSFP+ to QSFP+ Active Optical Cable,OM2 Cable, Length 100m
Accessories Active Optical Cable Advantages:
Quad Small Form-factor Pluggable (QSFP)
40GBASE-SR4 compliant
QDR, DDR, SDR (Infiniband) compliant
Bi-directional parallel link
10.3125Gb/s per lane, x4 channels
Up to 100m
Low profile connectors
Low power consumption
Bundle multi-mode fiber array
850nm VCSEL four array
PIN diode four array
Hot-Pluggable
I2C management interface
From 0 to 70 degree case temperature
3.3V power supply voltage
Electrical 38-pin connector
Technical Indexes
| Parameter | Test Point | Min | Max. | Units | Conditions |
| Single ended input voltage tolerance | TP1a | -0.3 | 4 | V | Referred to TP1 signal common(Internally AC coupled) |
| Differential input voltage swing | TP1a | 200 | 1600 | mVpp | Peak to peak differential |
| AC common-mode input voltage tolerance | TP1a | 15 | - | mV | RMS |
| Differential input return loss | TP1 | See IEEE 802.3ba 86A.4.1.1 |
- | dB | 10MHz to 11.1GHz |
| Differential to common-mode input return loss | TP1 | 10 | - | dB | 10MHz to 11.1GHz |
| J2 jitter tolerance | TP1a | 0.17 | - | UI | |
| J9 jitter tolerance | TP1a | 0.29 | - | UI | |
| Data Dependent Pulse Width Shrinkage (DDPWS) tolerance | TP1a | 0.07 | - | UI | |
| Eye mask coordinates: X1, X2 Y1, Y2 |
TP1a | Specification values 0.11, 0.31 95, 350 |
UI mV |
Hit ratio = 5 x 10-5 see Figure. 3(a) |
E-link’s LNK-AA4CMX-XXX series are active optical cables (AOC) that allows bi-directional 40Gbps transmission
suitable for Ethernet 40GBASE-SR4 and InfiniBand QDR application and other high-throughput data network,
with advantages such as high speed, high density, low latency, low power consumption and light weight.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.