Engineering Plastic PVDF Sheet Rod PVDF Board Plate Strong And Tough
High-end engineering plastic PVDF sheet rod wholesale PVDF board plate
PVDF, polyvinylidene fluoride, is a versatile fluoropolymer which is both strong and tough as reflected by its tensile properties and impact strengths. PVDF has excellent resistances to creep and fatigue. In thin sections, such as films, filament, and tubing, PVDF components are flexible and transparent.
Where load bearing is important, PVDF fluoropolymers are rigid and resistant to creep under mechanical stress and load. Because PVDF is stable to sunlight, and other sources of ultraviolet radiation, it is widely used as base resins for long-lasting exterior coatings. An additional advantage over other fluoroplastics is that PVDF can be welded into tanks for acid and corrosive chemical processing in elevated temperature environments.
| Item | PVDF Sheet |
| Color: | White |
| Density: | 1.8g/cm³ |
| Heat resistance (continuous): | 150℃ |
| Heat resistance (short-term): | 160℃ |
| Melting point: | 175℃ |
| Linear thermal expansion coefficient (average 23~100℃): | 130×10-6 m/(m.k) |
| Average 23--150℃ | 145×10-6 m/(m.k) |
| Flammability(UI94): | V-0 |
| Tensile modulus of elasticity: | 2300MPa |
| Dipping into water at 23℃ for 24h | 0.01 |
| Dipping into water at 23℃ | 0.0005 |
| Bending tensile stress/ Tensile stress off shock | 50/Mpa |
| Breaking tensile strain | >20% |
| Compressive stress of normal strain-1%/2%: | 17/32 MPa |
| Pendulum gap impact test | 10KJ/m2 |
| Rockwell hardness: | M75 |
| Dielectric strength: | 18kv/mm |
| Volume resistance: | 10 15Ω×cm |
| Surface resistance: | >10 15Ω |
| Relative dielectric constant-100HZ/1MHz: | 7.4/6 |
| Critical tracking index(CTI) | 600 |
| Bonding capacity: | 0 |
| Food contact: | + |
| Acid resistance: | + |
| Alkali resistance | + |
| Carbonated water resistance: | + |
| Aromatic compound resistance: | + |
| Ketone resistance: | 0 |
Advantages of PVDF sheet board rod:
PVDF fluoropolymers are rigid and resistant to creep under mechanical stress and load. Because PVDF is stable to sunlight, and other sources of ultraviolet radiation, it is widely used as base resins for long-lasting exterior coatings. An additional advantage over other fluoroplastics is that PVDF can be welded into tanks for acid and corrosive chemical processing in elevated temperature environments.
Key Features of PVDF sheet board rod:
Mechanical strength and toughness
High abrasion resistance
High thermal stability
High dielectric strength
High purity
Readily melt processable
Work temperature range -30-150 ° C
Resistance to most chemicals and solvents
Resistance to ultraviolet and nuclear radiation
Resistance to weathering
Resistance to fungi
Weldable
Applications of PVDF sheet board rod:
High purity water
Halogen
Acid applications
igh temperature applications
Pressure applications
Solar glazing
For sheet/board/plate/rod/tube, the products will be sent for 1 day. And we support OEM and ODM.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.