4mm 6mm 5mm Peek Sheet Material Wear Resistant Black CNC Zero Cut
4mm 6mm 5mm Peek Sheet Material Wear Resistant Black CNC Zero Cut
PRODUCT PARAMENTERS
| Property | Item No. |
Unit
|
PEEK-1000 | PEEK-CA30 | PEEK-GF30 |
| 1 | Density | g/cm3 | 1.31 | 1.41 | 1.51 |
| 2 | Water absorption(23℃ in air) | ％ | 0.20 | 0.14 | 0.14 |
| 3 | Tensile strength | MPa | 110 | 130 | 90 |
| 4 | Tensile strain at break | ％ | 20 | 5 | 5 |
| 5 | Compressive stress(at 2％nominal strain) | MPa | 57 | 97 | 81 |
| 6 | Charpy impact strength(unnoticed) | KJ/m2 | No break | 35 | 35 |
| 7 | Charpy impact strength(notched) | KJ/m2 | 3.5 | 4 | 4 |
| 8 | Tensile modulus of elasticity | MPa | 4400 | 7700 | 6300 |
| 9 | Ball indentation hardness | N/mm2 | 230 | 325 | 270 |
| 10 | Rockwell hardness | -- | M105 | M102 | M99 |
PEEK is a kind of heat-resistant, high performance thermoplastic special engineering plastics.
It has good mechanical properties and chemical resistance, abrasion resistance, and
hydrolysis resistance properties etc.; it has a light proportion and self-lubricating properties.
Guandong Engineering Plastics Industries (Group) Company, has studied and applied this
material in many industries for many years. Due to very good processing properties, it can be
filled with carbon fiber and MoS2 etc. to improve lubrication performance and mechanical
strength further.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.