18.11V 120W Portable Tesla Roof Mono Cell Solar Panel PERC

1. Tesla roof Mono Cell Solar Panel PERC Solar 120W House Appliances Solar System

1. Company Introduction 

There are more than 10000 square meters and large production equipment in the factory and has already achieved honors such as CQC certificates such as National Electrical Applicance, ISO 9001 international quality system certificate. We are excellent and honest enterprise of China's solar PV engineering enterprise in China.

2. The main values of the company 

Pursuing the quality concept of "sunshine quality, serving the world", and based on independent research and  Innovation, we develop 
towards the direction of "globalization, informatization, and profesionalization"

3. Chief Advantages Of Fusoli solar panels 

① Multi busbar technology

② Adaptability to harsh environments

Have passed the tests on salt spray and high ammonia corrosion

③ Better resistance to hot spots

By optimizing the current design and working condition, the problems on temperature coefficient and resistance to hot spots have been solved

④ Load capacity

The whole component has been passed the certification of wind load on the case of 2400pa and snow load of 5400pa

⑤ Anti-PID guarantee

Minimize the attenuation probability caused by PID phenomenon by battery perduction technology optimozation and material contorol

⑥ Industry-leading linear warranty

12 years of material warranty and with 25 years of Line property

4 Main Technology

• Double-sided power generation technology is one of the technological innovations The double-sided module can absorb sunlight from the front and back of the module at the same time to generate electricity,and the power generation gain can reach to a high efficiency
• Half-cell module technology----In a half cell, the current through each main grid is reduced to 1/2 of the original; therefore, the internal power consumption of the half-chip module is reduced to 1/4 of the whole-chip module
• Less shadow occlusion loss---Under the same occlusion situation, the shadow occlusion loss of the half-cell component is less than that of the entire component
• Low Working Temperature----After the R&D PV test system measures the working temperature of the half-cell module and the conventional module,  the temperature of the half-cell module is ~2 degrees Celsius lower than that of the conventional module
• High Output

5.On production qualifications