Additives In Asphalt Anti Rut Additive Anti Rut Agent For Municipal Roadss is a directly added into asphalt mixing plant asphalt modifier, which improved the high temperature and low temperature performance of asphalt mixture. The method of using is directly mixing with aggregate and bitumen to modify asphalt mixture. Asphalt mixing temperature is 175℃±5℃, normally suggested dosage is 0.3%-0.4% of asphalt mixture mass, small dosage can get higher performance. For special engineering needs, please consult us.

3kgs or 4kgs per hot-melt bag, 24 kgs per bag.
500KGS/ TON OF BAG, 25KGS/BAG, OR AS CUSTOMZIED

• The dynamic modulus of ZTA-RA modified asphalt mixture at 55°C is about twice that of SBS modified asphalt mixture.
• The strong viscosity of ZTA-RA increases the softening point of asphalt, reduces the sensitivity to temperature of asphalt, and increases the adhesion of bitumen to mineral aggregates.
• The dosage is smaller and the effect is remarkable. The dosage is 0.3-0.4% of the asphalt mixture, and the dynamic stability can be increased from 1500times/mm to about 15000times/mm.
• The elastic component of ZTA-RA has a function of recovering the elastic recovery of the deformation portion of the pavement at a higher temperature, thereby reducing reduces the risk of permanent deformation of the pavement.

    Anti-Rutting Asphalt Additive Asphalt Modifier Asphalt Road Pavement is mainly used in the middle, upper and lower layers of asphalt pavement construction and maintenance engineering for all types of surface and base layers.

* Heavy-duty channelized traffic roads, long and steep roads, and roads in mountainous and heavy hilly areas with more sharp bends, which are more severely damaged by rutting.
* Sections with heavy traffic and heavy load.
* Important road sections such as highways, crossroads, airport runways, and municipal arterial roads.