220V 50mm Hot Dip Galvanizing Furnace Gas Industrial Heat Treat Oven

Industrial Large Capacity Gas Hot Dip Zinc Galvanzing Furnace with Customized Size

1. Composition of hot dip galvanizing furnace

The zinc galvanizing furnace involves a zinc kettle which is to keep molten zinc liquid.

And the parts are kept in the zinc kettle so as to be galvanized. The hot dip zinc galvanziing

furnace is composed of the following parts: zinc kettle, refractory cover plate, U shape furnace

shell, lining, flue, bottom support, gas burning system, electrical control system, leak alarm, etc.

2.Gas Burning System Parameters

3.Basic Parameters of zinc galvanizing furnace

4. Furnace Burning System

The zinc hot dip galavanizing furnace employs the high-velocity pulse combustion system, and the burners

are placed in the diagonal position of the furnace, and the heat continuously surrounds the zinc kettle from

these two sides. The output power of the combustion engine can reach 170M/sec or more, so the temperature

rises rapidly in a cycling way. The heat conduction transfers heat to every point of zinc kettle, and it also

absorbs the heat generated by the combustion engine. The heat radiates evenly around the outer wall of

zinc kettle, from top to bottom, front to back, so it can increase heating efficiency and generate approximately

the same heat as heat conduction, which greatly increases the service life of zinc kettle. Under pulse control mode,

the output power of each zone can be continuously adjusted from low-power to high-power.