ASTMB68 Standard Heat Exchanger Tube
Heat Exchanger Tube Suitable For Flooded Evaporator In The Shell Heat Exchanger
Product Description
The heat exchanes efficiency is enhanced by the special design Furthermore, enhancement of the inside surface of the evaporator tube reduce forming the thermal resistance on the inside surface of tube and the heat exchange efficiency is improved a lot.The surface of the evaporator tube is densely covered with micropores, and the lower part of the evaporating hole is connected with a groove. This structure of evaporator tube improves the density of the core of the vaporization and promotes the heat transfer effect of the boiling.
Application
Evaporator tubes suitable for full night or falling film evaporators.The evaporator tube especially suitable for flooded evaporator in the central air-conditioner centrifuge, the shell heat exchanger.
| Evaporator Tube Suitable For Flooded Evaporator In The Shell Heat Exchanger | |||||||||
| Item | Light tube | Wing fragment | |||||||
| O.D. | O.D. | Wall Thickness | minimum Wall Thickness | Ridge Height | Nominal outside surface area | actualoutside surface area | Nominal inside surface area | Nominal inside surface area | |
| mm | mm | mm | mm | mm | ㎡/m | ㎡/m | ㎡/m | ㎡/m | |
| 1 | 15.88 | 15.7 | 0.635 | 0.56 | 0.3 | 0.0499 | 0.1698 | 0.043 | 0.0657 |
| 2 | 19.05 | 18.85 | 0.635 | 0.56 | 0.38 | 0.0598 | 0.2056 | 0.0529 | 0.0901 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.