X2 capacitor 0.1uF/310/330AC P15 D2

 ^{PRODUCT INFORMATION}

  ^{Introduction of X2 Safety Capacitor:}

 1.  Safety Capacitors : High Stability

2.  Non-inductive.

3.  Self-healing characteristics.

4.  Plastic case, epoxy resin filled, box made of solvent resistant material.

5.  Excellent for used in antenna coupling, line-by-pass, and across-the-line. Application where size is critical.

6.  Tested Standard:IEC384-14, DIN EN 132 400,UL 1414, CSA C22.2

7.  Safety Approved (UL. ENEC. CQC)

8.  The lead wire adopts the tin-plated tin and wraps up the copper wire, using the fire-retardant epoxy resin

encapsulation in the in the       plastic shell, fire-retardant performance reaches UL94V-0 grade.

Application of X2 Safety Capacitor

Typical Applications: Standard X2 are used parallel over the mains for reducing electromagnetic interferences coming from the grid. For such purposes they must meet the applicable EMC directives and standards.

Leads for line bypass, antenna coupling, jumper and spark suppression circuits.
Can be used in EMI filter.
switching power supply applications.
Business machine appliances such as: adding machines, computer monitors and monitors...
Household appliances such as: blenders, fans, coffee grinders, DVD players, stereo and TV circuits...
Thyristor and thyristor electrical appliances, such as: dimmers...

	1	Small size.
	2	Widetemperature,frequency irritating content DF with high stability.
	3	High current withstands extremely highdielectric strength.
	4	Long-term work stability.
	5	Fire rating:UL94V-0.6.
	6	There is self-healing.
	7	Widely used with power supply jumpercircuits, bypass, antenna coupling and other interference sites.
	8	Can withstand the pressure.

^{Specifications}

^{1. Operating temperature: -40°C ~ +110°C}

^{2. Capacitance range: 0.01uF~3.3uF}

^{3. Capacitance tolerance±5%(J), ± 10%(K),± 20%(M )}

^{4. Rated voltage: 310VAC,330VAC}

^{5. Dissipation factor:0.1%MAX AT 1KHz, 25°C}

^{6. Voltage proof: 2100VDC 1Sec (20°C)}

^{7. Insulation resistance:}

^{>30,000MΩ (C≤0.33uF)}

^{>10,000MΩ/ uF (C>0.33uF) AT 25°C}

^{8. Endurance: The test voltage 344VAC shall be applied for 1000 Hours in the 85°C chamber. During this period,}

^{1000VAC 60HZ for a period of 0.1Sec be applied once each hour. After the test. ΔC/C≤10% , ΔDF≤0.04%,}

^{ΔIR≥50% of the specified value.}

^{SIZE SPECIFICATION}