Safe Disposal, biohazard labeling, Autoclavable Bag, Polypropylene, Disposable, clear transparent Disposal sack
Safe Disposal, Biohazard Labeling, Autoclavable Bag, Polypropylene, Disposable, Clear Transparent
- Clear bags imprinted with blue biohazard labeling designed for safe disposal
- Constructed of 2 mm thick polypropylene allowing for repeated autoclaving
- Front write on panel
- Strong side seams for securely holding items
- Autoclavable at 250°F (121°C)
Please inquiry us
Bagplastics@vip.163.com
The heavy gauge polypropylene autoclave bags are puncture-resistant and withstand temperatures up to 136°C (250°F). Each bag has an oversized white marking panel, and are marked with the words "Hazardous Waste" and the standard "Biohazard" symbol. At 2.25mil thick, they are designed to resist stretching, poking, and includes seamless bottoms for exceptional strength.
- Withstand autoclaving temperatures up to 136°C/250°F.
- Has an oversized white marking panel with the words "Hazardous Waste" and the standard "Biohazard" symbol.
- Designed to resist stretching, poking, and also include seamless bottoms for exceptional strength.
Please inquiry us
Bagplastics@vip.163.com
Additional Products for Use With Autoclavable Bags
|
|
|
|
|---|---|---|
Autoclave Safe Bag ClipsThese clips, can be opened and closed with one hand to easily and securely close the gathered top of an autoclave bag after it has been filled with wastes. Stiff plastic design holds the bag neck closed while allowing release of internal pressure that can develop during the autoclave cycle. After autoclaving, the clip is left on the bag for final disposal. Closed internal dimension is ⁷/₁₆ inches. Suitable for bench-top sized bags or small autoclave bags ranging in size from 12 x 24 inches to 19 x 23 inches. Use with larger bags is not advised. |
Biohazard Bag HoldersKeep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification as a biohazard containment system. The small bag holder is ideal for benchtop use. Assembly takes only minutes and is permanent. Dishwasher-safe and autoclavable at 121° celsius (250° fahrenheit). reusable, sanitary cover to fit medium and large Biohazard Bag Holders. |
- Biohazard Bag Holder CoverDishwasher and autoclave safe, the reusable Biohazard Bag Holder Cover, opens quickly and easily by pressing the built-in release tab – no batteries required! The orange cover fits both the Medium and Large sizes.Biohazard Bag Holders and features a smooth 10.2 x 10.2 centimeter (4 x 4 inches) area for applying labels. The cover can be installed in seconds and improves the sanitation of these biohazardous waste containers. The center panel of the lid opens to an upright position and reveals a large 20.5 x 24.4 centimeter (8 x 9½ inch) opening through which wastes can be deposited. Autoclavable at 121° celsius (250° fahrenheit). |
Bagplastics@vip.163.com
|
|
|
|
|---|---|---|
Poxygrid - Bag HoldersSturdy wire holder keeps bags open while a separate hooked ring that rests over the top keeps them securely in place Bright biohazard orange colored epoxy-coated steel wire is chemical and corrosion-resistant, and unaffected by organic solvents, salts, weak acids and weak alkalis. It will withstand a temperature range of -223º celsius (-369º fahrenheit) to 121º celsius (250º fahrenheit) and is autoclavable. |
Silicon Loop TiesUse these adjustable 'rubber bands for bundling, binding, color coding, securing columns and burettes, controlling flexible tubing, keeping foil covers on canisters, and securing dialysis or biohazard bags. They remain flexible from -46˚ celsius to 121˚ celsius (-50˚ fahrenheit to 250˚ fahrenheit) for use in the autoclave or freezer. Small, tension-control band slides for a loop range of 5 millimeter (0.2 inch) to 100 millimeter (4-inch) in diameter. Includes 10 of each color, red, blue and yellow. |
Odo-Clave Autoclave DeodorizerHeat-released deodorant pads neutralize autoclave odors with one of four pleasant scents. Triple strength clove releases three times the deodorant of the standard pads while costing less than two standard pads. Simply open foil pouch and place pad in bag prior to autoclaving. Pads have a three year life span but will last longer if stored in a sealed container. |
Please inquiry us
Bagplastics@vip.163.com
Factory Supplier Red Biohazard Disposable Waste Bag for Medical infectious waste
1)100% virgin octene LLDPE or vigin HDPE for medical usage
2) Biodegradable material ,eco-friendly
3) Strict quality control in the whole process of producing
4) The competitive price
5) Prompt delievery
Please inquiry us
Bagplastics@vip.163.com
Description of red HDPE biohazardous & infectious waste bags for hospital
| Item | Yellow plastic biohazard bag for hosptial clinical waste bags |
| Bag Shape | 3-side sealed bag |
| Material | BIOHAZARD, AUTOCLAVABLE, BIODEGRADBALE, LDPE or HDPE |
| Thickness | CUSTOMIZED |
| Overall Size(mm) | Customized |
| Attachments or special process | None |
| Printing | Gravure printing + customized up to 12 colors |
| Usage | biohazard, hospital, healthcare, infectious |
| Features & Advantages | 1) Heat-seal, ensure the sealability. vacuum available if it is needed; |
| 2) Existing samples for free; | |
| 3) Both sides of full printing; | |
| 4) Accurate polychrome printing brings perfect image performance; | |
| 5) High quality with the competitive price and best service; | |
| 6) First-grade material and inks, ensure the safety of your products; | |
| 7) Professional suggestion as your requirements. The most suitable packaging for your products; | |
| BAGEASE.CN | |
| Payment | All plate fee and 50% pay in advance, 50% on delivery. |
| Shipping | 15-20 days after receiving 50% pay in advance |
| ENQUIRY | Please inquiry us Bagplastics@vip.163.com |
Please inquiry us
Bagplastics@vip.163.com
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.