Stainless Steel Medium Wave IR Lamp Holder GJ0002L 11x23mm
| Material | Stainless Steel |
|---|---|
| Structure | Wave Clamp |
| Wave Range | Medium Wave |
| Tube Diameter | 11x23mm |
Twin Tube configuration with stainless steel construction for durability and heat resistance.
| Cross-Section | a | b | c | d | e | M | UVIR NO. |
|---|---|---|---|---|---|---|---|
 | 10 | 23 | 25 | 20 | 10 | M5 x 20 | GJ0002L |
 | 15 | 33 | 30 | 25 | 15 | M5 x 25 | GJ0003L |
 | 8 | 18 | 25 | 25 | 10 | M5 x 20 | GJ0001L |
The infrared twin-tube emitter is designed for horizontal operation only. Special IR emitters for vertical installation positions are specially manufactured and marked as such.
To install our IR emitters, typically one mounting and one spring clamp are required, along with central supports if necessary, all manufactured by HNI. The IR twin-tube emitter must be secured to a stable support (steel support plate: > 1.5 mm).
- Drill mounting holes with Φ9.2 mm for clamp spring in the support (mounting plate) at distance L.
- Screw the clamp spring in place with ceramic washers on the mounting plate.
- Press the IR emitter into position in the retaining spring clip. The emitter must point at all the surface to be heated. The gold reflector should be pointing towards the support plate.
- Tighten the fastening nuts on the knurled nut.
Pulling the lead wire must not cause any tension on the press seal. Bending radius of lead wire: > 30 mm
L = Overall length of emitter LG: 2x35 mm (two-sided connection) or L = Overall length of emitter LG: 35 mm -20 mm (one-sided connection)
If the following overall emitter lengths are exceeded for LG, a central support is necessary:
- Tube dimensions: 23 x 11, LG > 1500 mm
- Tube dimensions: 34 x 14, LG > 2000 mm
After installation, the quartz glass tube of the IR emitter must be cleaned on the side without gold plating. Use the included cleaning cloth or a clean linen cloth (without textile finishing agents) soaked in methylated spirit (such as rubbing alcohol) to remove any impurities or fingerprints from the surface.
| Wave Range | Tube Diameter(mm) | UVIR Model No | Heraeus Model No. |
|---|---|---|---|
| Short Wave | 8 x 18 | GJ0001 | 09759293 |
| Short Wave | 11 x 23 | GJ0002 | 09759287 |
| Short Wave | 15 x 33 | GJ0003 | 09758026 |
| Medium Wave | 8 x 18 | GJ0001L | 09758010 |
| Medium Wave | 11 x 23 | GJ0002L | 09758013 |
| Medium Wave | 15 x 33 | GJ0003L | 09758016 |
- Package tracking
- Technical support
- 24 hours working time
- Discount for reorder
- Replacements for quality problems
- Confidentiality of customer information
- Expert sales teams for accurate communication
- Professional technical teams for new product development
- Technical production teams for assembly line production
- Quality inspection teams for product quality control
- Experienced after-sales teams for customer support
We are a professional factory.
Our factory is located in JiangMen City, Guangdong Province, China. You can fly to GuangZhou BAIYUN airport directly. We warmly welcome all clients to visit us!
We are happy to offer samples for you to check and test.
Low MOQ, 1 piece for sample checking is available.
15 days after receiving your payment.
"Quality is priority." UVIR people always attach great importance to QC from the very beginning to the very end. Our factory has gained CE, ISO9001, RoHS, SGS authentication.
We can provide the right heat solution for you and offer OEM services. We can print your logo on your product as per your requirements.
Any quality issue, once confirmed, we will compensate our customer.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.