LaBr3 SiPM Scintillator Detector
LaBr3 SiPM Scintillator detector
The LaBr3(Ce) detector is completely compatible with the signal processing electronics normally used with NaI(Tl) scintillation detectors. However, the performance of the LaBr3(Ce) device is superior to that of NaI(Tl) detectors. No adapters are required for direct connection of tube base preamplifiers or MCAs to the 14-pin PMT base. The better resolution, efficiency and relatively short decay time (16 ns) allow these detectors to be used with more complex spectra than scintillation detectors based on NaI(Tl) as well as in other applications previously thought to be too demanding for any scintillation detector.
Properties:
|
Model |
S-1 | S-2 |
| Crystal size | 1” | 2” |
| SIPM | 6x6mm | 6x6mm |
| SIPM Numbers | 1~4 | 1~16 |
| Storage temperature | -20 ~ 70℃ | -20 ~ 70℃ |
| Operation temperature | -10~ 40℃ | -10~ 40℃ |
| HV | 26~+31V | 26~+31V |
| Scintillator | NaI(Tl),CsI(Tl),GAGG,CeBr3,LaBr3 | NaI(Tl),CsI(Tl),GAGG,CeBr3,LaBr3 |
| Humidity | ≤70% | ≤70% |
| Signal Amplitude | -50mv | -50mv |
| Energy resolution | ＜7.5% | ＜7.5% |
S2 Dimension S2 Connector
Application:
Radiation dose measurement
Energy measurement
Spectrum analysis
Nuclide identification
Product renderings:
FAQ:
1.Q: Are you a factory manufacturer?
A: Yes ,we are manufacturer with 13 years experience in the scintillator crystal industry and supplied many famous brands with good quality and service.
2.Q:Where is your main market?
A:Europe, America, Asia.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.