Hard Plastic Case Non Magnetic Tool Kit with Anti-static Safety Features for MRI Scans

Theme: Detailed introduction of all screwdriver types with production and marking.

Content (approx. 370 words):

Jovvi‘s titanium screwdriver family covers every fastener type found on MRI scanners. Each features a solid Grade 5 Ti blade (not coated, not welded) with tang-through brass handle – no hidden steel.

• Sizes: #000, #00, #0, #1, #2

• Tip grinding: CNC ground with optical verification

• Corner radius: <0.03 mm (prevents cam-out)

• Laser mark on blade: PH#2 Ti ≥90% | BATCH: XXXX

• Sizes: 1.5 mm, 2 mm, 3 mm, 5 mm, 6 mm

• Tip taper: <0.02 mm over 10 mm (parallel faces)

• Laser mark on blade: FL3mm Ti ≥90% | SN: XXXX

• Sizes: T6, T8, T10, T15, T20, T25, T30

• 6-lobe star pattern ground in one indexed operation

• Tolerances: Per ISO 10664

• Laser mark on blade: T20 Ti ≥90% | BATCH: XXXX

• For animal MRI and small device repair

• Sizes: Phillips #000, #00; Flat 1.5 mm, 2 mm

• Blade length: 50 mm (short for control)

• Handle: Anodized aluminum (lightweight, non-magnetic)

• Laser mark on handle: PRECISION | 1.5mm

• For live electrical work (MRI console panels)

• Insulation: Rubber overmold on brass handle (1000 V rated)

• Tip: Same Grade 5 Ti as standard

• Laser mark: 1000V INSULATED | Ti ≥90%

Tang-Through Verification:
Every Jovvi screwdriver has a 2 mm inspection hole at the base of the handle. Through this hole, you can see the titanium blade extending the full handle length. This confirms no steel core.

Laser Mark Location:

• Standard: On blade, near handle junction (visible when tool is in use)

• Optional custom: On brass handle flat (for hospital asset numbers)

Screwdriver Set Packaging:
Foam case with color-coded positions (Phillips = blue, Flat = green, Torx = red, Precision = yellow, Insulated = orange).

Factory note: “No coatings, no welded tips, no steel cores. Just solid titanium from tip to tang, verified by laser mark and inspection hole.”