Comfortable Feel Silicone Leather Fabric 1.6mm Thick Belt Nappa Leather

Comfortable Feel Second Collection Silica Gel Fabric 1.6mm Thickness Nappa Pattern Leather For Belt

• Silicone fabrics are emerging in the market, especially as the marketplace is looking for new alternatives to vinyl and polyurethane based fabrics. However, no two silicone fabrics are the same. There are several ways that you can see if your fabric is actually 100% silicone with no finish (like ours) or if it is 100% silicone with a finish, or a blend with vinyl or polyurethane.

1. Scratch Test

• The easiest way to see if your silicone fabric has a finish on it or not is to scratch it with a key or your fingernail. Simply scratch the silicone surface to see if a white residue comes up or if a scratch mark remains. Sileather™ is scratch resistant and will not leave a white residue. The white residue is generally due from the finish.
• ​The most common reason for a finish on a fabric is usually performance-motivated. It will add to the durability (double rub count), the haptic touch, and/or to alter the aesthetic makeup. However, finishes can oftentimes be damaged by high strength cleaners, scratching (such as keys in your pocket, pants buttons, or metal components on purses and bags).

​2. Burn Test

• Silicone, when it is of high quality, will burn cleanly and not give off any smells and will have a light white smoke. If you burn your silicone fabric and there is a black or dark colored smoke, then your fabric is either:
• Not 100% silicone
• A poor quality silicone
• Blended with another material - the most common today is silicone with polyurethane. These fabrics use silicone for some of the weatherproof properties, but are generally do not perform as well as the silicone layer is usually very thin.
• Defective or impure silicone

​3. Smell Test

• Our Silicone Leather has ultra low VOCs and will never give off strong odors. VOCs (volatile organic compounds) are commonly given off from vinyl and polyurethane fabrics. Examples of common locations are inside of cars (new car smell), RVs and trailers, boat interior furniture, etc. VOCs can be given off from any vinyl or polyurethane fabrics, or may be due to traditional coated fabric production methods that use solvents. These are most noticeable in small, enclosed areas.

• A simple test is to put a piece of your silicone fabric inside of a plastic container for 24 hours. After 24 hours, open the bag and test if there is a strong smell from the inside. If there is, that means that solvents were most likely used in the production process, or it is not a 100% silicone coating without a finish. Our Silicone Leather uses an advanced solvent-free production process, so it is not only almost odorless, but are much healthier and safer than vinyl and polyurethane fabrics.