Continuous Rim 1A1R 125X1.2X20 Diamond Wheels for Tungsten Carbide

Shine Abrasives 1A1R Diamond Wheels 5 Inch 125mm diameter For Tungsten Carbide tools Cutting 

the cutting off wheels with Resin bond, the thickness is 1.2mm, the wheels bore is 20mm.

Shine Abrasives 1A1R cutting off wheels are available diameter range from 50mm to 400mm

and thickness from 0.2 to 2mm.

Continous rim type cutting wheels have advantages,

Provides the smoothest of cuts.

Best performance when used wet

 For hard materials requiring a high-quality cut

Good working life, good cut rate, best finish

Drawing of Shine Abrasives Continuous Rim 1A1R 125X1.2X20 Diamond Wheels for Tungsten Carbide

Main sizes form of Shine Abrasives Continuous Rim 1A1R 125X1.2X20 Diamond Wheels for Tungsten Carbide

Other standard sizes also are available as requested.

Typies of diamond cutting off wheels.

Segmented type,turbo type,Continuous type.

Safe for working the diamond cutting off wheels.

Never twist or turn a segmented blade in the cut because it may result in segment breakage

Never use wet blades dry

Remove dry blades from cut for 10 seconds of each minute of cut to air cool

Never operate any saw wet or dry cutting wheels without the blade guard