Weatherproof Construction Silicone Sealant Quick Drying Bath Sealant

Weatherproof Construction Silicone Sealant Quick Drying Bath Sealant

Feature of Construction Silicone Sealant

* Neutral-cure;
* Excellent weatherproof performance;
* Strong cohesiveness;
* Super anti-fungus performance.

Directions for use

1. Ensure all surfaces are clean, dry ad grease-free. Remove all grit, oil, grease, detergents, flaking paint, any loose materials and old sealant.

2. Cut off tip of nozzle and cartridge. Screw on nozzle to cartridge.

3. Fit into chalking gun, applyn surface in steady flow.

4. If required smooth and shape sealant with spatula dipped in mild detergent.

5. Remove excess uncured sealant with a mineral turpentine soaked cloth. Fully cured excess sealant an be removed by trimming with a sharp knife.

Construction Silicone Sealant Parameters

Material preparation:

For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air.

DO NOT clean glass with soap and water solutions.

Soap residue can cat as a release agent and result in adhesion failure.

Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure.

Product Show 

Application:

1. Glass must be properly prepared as described.

2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium.

3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass.

Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate.

Colors 

Product Usage 

How to use