500 KPa Tyre Pressure Gauge Schrader Valve 63mm Heavy Duty Tire Pressure Gauge

2.5" 500 kPa Red Hose Heavy Duty Mechanical Car Tyre Pressure Gauge with Schrader Valve

Des​cription

This heavy duty mechanical tire gauge is calibrated to ANSI B40.1 Grade B (2%) international accuracy standard so you get a precise, accurate pressure reading every time you use it. t features a steel and brass construction with an extended 5mm chuck tip, so you get a great seal with no air leakage. This robust and durable precision automotive tool is also surrounded by a rubber cover, so it is protected from drops and is easy to grip.

Special features

Mechanical design, no batteries needed

Reliable performance, robust body with rubber cover

360 degree swive, easy to operate

Durable air valve button

Operating Instructions

Use the vehicle's recommended pressure, do not exceed the "max pressure" figure found on the tire sidewall.
Check pressure when tires are cold and have sat for at least one hour.
Removing cap from inflation valve, place the gauge chuck firmly onto tire valve stem and press down evenly. If air escapes, apply more pressure until air stops escaping.
Remove gauge from valve stem to read tire pressure.
If tire pressure is too high, refit the tire pressure gauge to valve stem then gently press pressure release button until recommended pressure is reached.

If tire pressure is low, inflate to the recommended pressure then recheck.
Store tire pressure gauge in a safe, dust free area.

Ordering information

Model / Dial size / Pressure Range / Process connection / Options